Search found 15 matches

by spelle
Sat Aug 31, 2013 1:51 pm
Forum: MakerCAM
Topic: Eveery thing messed-up
Replies: 11
Views: 2882

Re: Eveery thing messed-up

Yes, thanks to your tutorial .. The job is actually running "in the air" using the UGS v1.0.7 from Will. It looks good, I will cut it as soon as my holding table is "up" (I dismounted it for painting). By the way, maybe it is not the good thread, but is there anyway to have a kind of "project manage...
by spelle
Fri Aug 30, 2013 7:48 pm
Forum: MakerCAM
Topic: Eveery thing messed-up
Replies: 11
Views: 2882

Re: Eveery thing messed-up

Ok. I think I understood :-) About TinkerCAD and 123D, I'm not really OK with these Webapps .. neither do I am OK with creating a lot a lot of accounts everywhere. I prefer encourage the opensource software and participate if I can with my small means. Anyway, I think I succeeded : Screenshot.png Ho...
by spelle
Fri Aug 30, 2013 2:07 pm
Forum: MakerCAM
Topic: Eveery thing messed-up
Replies: 11
Views: 2882

Re: Eveery thing messed-up

Diffrence/union... Ok I got It .. will try tonight ! :-) I have the ShapeOko since June. I am still in making my experience / explorating and getting used to a workflow. I tried pyCAM before, but last time It made two pass at each depth .. It looks like it is not intended to be used in a 2D worflow....
by spelle
Fri Aug 30, 2013 1:24 pm
Forum: MakerCAM
Topic: Eveery thing messed-up
Replies: 11
Views: 2882

Re: Eveery thing messed-up

e.g. group them ?
by spelle
Fri Aug 30, 2013 1:23 pm
Forum: Software - CAD, CAM, Workflow Help
Topic: Octoprint for CNC / Grbl
Replies: 9
Views: 6304

Re: Octoprint for CNC / Grbl

How do we load GCode file ?

There is the Upload button, but it looks it it expect an SD Card somewhere...

Cheers !
by spelle
Fri Aug 30, 2013 5:30 am
Forum: MakerCAM
Topic: Eveery thing messed-up
Replies: 11
Views: 2882

Eveery thing messed-up

Hi ! I want to make an enclosure which support an 80x80mm fan for the GRBL controller. I thus draw this : Screenshot-Enclosure-top.svg - Inkscape.png I then imported it in MakerCAM, and here is the result : Screenshot-makercam.swf - Chromium-1.png I believed It was my drawing. I thus open it with py...
by spelle
Thu Aug 29, 2013 9:44 am
Forum: MakerCAM
Topic: missing a line
Replies: 0
Views: 609

missing a line

Hi !

MakerCAM miss a line when exporting the ShapeOko Calibration Pattern using a Follow Path operation :
Screenshot-G-Code Visualizer.png
Screenshot-G-Code Visualizer.png (23.59 KiB) Viewed 609 times
Any Idea why ?

Cheers !
Sebastien.
by spelle
Thu Aug 29, 2013 9:36 am
Forum: Software - CAD, CAM, Workflow Help
Topic: Inkscape - MakerCAM - GrblController worflow issue
Replies: 7
Views: 2169

Re: Inkscape - MakerCAM - GrblController worflow issue

Hi !

Will, I gave a try to UGS v1.0.7. It looks like working providing I ran the job "in the air".

However, it didn't told me that the job was finished whereas all the movement where accomplished.

Shall I report the issue ?

Cheers !
by spelle
Thu Aug 29, 2013 8:55 am
Forum: Software - CAD, CAM, Workflow Help
Topic: Inkscape - MakerCAM - GrblController worflow issue
Replies: 7
Views: 2169

Re: Inkscape - MakerCAM - GrblController worflow issue

Hi !

Well, it seems that my SVG is corrupted...

Thanks !

Cheers !
Sebastien
by spelle
Thu Aug 29, 2013 6:58 am
Forum: Software - CAD, CAM, Workflow Help
Topic: Inkscape - MakerCAM - GrblController worflow issue
Replies: 7
Views: 2169

Re: Inkscape - MakerCAM - GrblController worflow issue

Thanks will. I will give a try ASAP.