The Shapeoko Forum

How about changing the Plunge Feedrate in the Tool tab?

chant wrote:...you can always alter the command key for the soft reset to something that is type able...

Can you explain how to do that, please? Had some problems with ctrl-x too.

I'm selling a Renishaw TP1S touch probe. You can find the specifications here: https://www.renishaw.com/cmmsupport/knowledgebase/en/tp1s-legacy-probe--22347 Users of this forum can have it for 150€. Original listing here: https://www.ebay-kleinanzeigen.de/s-anzeige/renishaw-tp1s-messtaster-messfuehl...

I'm selling a Leadshine M880/M840 Microstep Driver. Delivers up to 7,8A Current. Users of this forum can have it for 50€. Original listing here: https://www.ebay-kleinanzeigen.de/s-anzeige/leadshine-m880-m840-schrittmotortreiber-steuerung-cnc-endstufe/457202677-168-2456 DSCF0949.jpg DSCF0951.jpg DSC...

Try the following: Under the "Passes" Tab tick "Smoothing" and change the default value of 0.01mm to let's say 0.1mm. This will generate a gcode file with much much less lines because the toolpaths are simplified with up to 0.1mm (or the value you typed in the smoothing option) deviation from the ac...

I'm experiencing the same issue since i switched from A4988 drivers to DRV8825s. I found no sign of regularity for this behavior, it's 1 in 6-7 times that the motors are locked, and yes, it feels like as if you shorted both motor coils on an unconnected motor. For your purpose, getting a motor with ...

Thanks for the inspiration!
Total cost is 7€ and installation took 10 minutes, definitely faciliates working on the machine a lot!

Look at this: http://www.shapeoko.com/forum/viewtopic.php?f=30&t=6311 Implementing a Display should be easy. I have a working version for analog Displays (vu-meters). Pros: -you have a fully working pid Controller -readout of the Speed is accurate (look at that graph in the link, rpm/pwm Ratio isnt ...

(Maybe too) simple workaround:
Try manually jogging your Z to +3mm before starting to send the gcode-file.