Search found 5 matches

by kolovic
Sun May 10, 2015 7:32 am
Forum: Mini Spindles - Purchased
Topic: 400 watt brushless spindle and controller
Replies: 59
Views: 36184

Re: 400 watt brushless spindle and controller

Great, you get working spindle :). How you start and stop spindle? Connecting main power to start motor or EN to GND to start motor. I have a new blue driver, but I have not tested. Can anyone tell me how to properly start and stop the motor? Is it EN to GND? My first driver was burned because I bre...
by kolovic
Sat Apr 04, 2015 1:46 pm
Forum: Mini Spindles - Purchased
Topic: 400 watt brushless spindle and controller
Replies: 59
Views: 36184

Re: 400 watt brushless spindle and controller

I oredered now this board for this BLDC motor http://www.ebay.com/itm/DC-12V-36V-500W-Brushless-Motor-Controller-Hall-Motor-Balanced-Car-Driver-Board-/251764515499?pt=LH_DefaultDomain_77&hash=item3a9e55a2ab It is for testing spindle, i think that is that driver slow, not enough RPM But is cheap and ...
by kolovic
Fri Apr 03, 2015 6:18 pm
Forum: Mini Spindles - Purchased
Topic: 400 watt brushless spindle and controller
Replies: 59
Views: 36184

Re: 400 watt brushless spindle and controller

That usually happens when the Hall sensor inputs are in the wrong order relative to the motor phase outputs. Try all six permutations of the HU, HV, HW wires -- a single one works in both directions, and that's the correct one. We've had a case on the forum where the motor or the controller were ap...
by kolovic
Thu Apr 02, 2015 7:30 pm
Forum: Mini Spindles - Purchased
Topic: 400 watt brushless spindle and controller
Replies: 59
Views: 36184

Re: 400 watt brushless spindle and controller

I forgot uplaod image.
by kolovic
Thu Apr 02, 2015 7:28 pm
Forum: Mini Spindles - Purchased
Topic: 400 watt brushless spindle and controller
Replies: 59
Views: 36184

Re: 400 watt brushless spindle and controller

I have same problem with this spindle motor. When I connected new motor he is vibrate - move left right milimeter and stop. Error led light, after every several second he vibrate and stop. I try to replace two phase, red and blue wire, and motor start correctly rotate in wrong way. When I relese DIR...