Search found 8 matches

by op117
Thu May 05, 2016 1:14 am
Forum: Shapeoko 3 Assembly
Topic: shapeoko 2 1M x1M help
Replies: 6
Views: 723

Re: shapeoko 2 1M x1M help

up graded to 9mm belts and no luck here is a video of it

https://www.youtube.com/watch?v=OcXiIyY ... e=youtu.be

the belts are right and i adjusted the motor power a little thinking it was that but no luck
any ideas?

also it done this before the 9mm upgrade
by op117
Mon Feb 08, 2016 7:58 pm
Forum: Shapeoko 3 Assembly
Topic: shapeoko 2 1M x1M help
Replies: 6
Views: 723

Re: shapeoko 2 1M x1M help

what causes the belts to jump not enough tooth's catching or are the belts flexing?
by op117
Mon Feb 08, 2016 7:48 pm
Forum: Software - CAD, CAM, Workflow Help
Topic: Problem with ramps and lead in Fusion.
Replies: 11
Views: 1090

Re: Problem with ramps and lead in Fusion.

i have the same problem in inventorHSM if u have a post option to change it from G0 ramps to G1 try that or set <all ways use high feed>on post of that operation see if that works. hope this helps! the reason is because the ramp is eater running to fast or slow depending on your setup for the runnin...
by op117
Mon Feb 08, 2016 7:38 pm
Forum: Shapeoko 3 Assembly
Topic: shapeoko 2 1M x1M help
Replies: 6
Views: 723

shapeoko 2 1M x1M help

after up grading my 250mmx250mm shapeoko to a 1Mx1M my Y axis is skipping at high feeds. the way it skips is like it walk left / right thin loses it place on a job when i run a lower feed in the same job. whats the best way to fix this? the belts are tight. skips after 30 in/min could not find right...
by op117
Fri Jul 10, 2015 1:38 pm
Forum: PCB Fabrication
Topic: Help with eagle cad and chili pepper
Replies: 1
Views: 1208

Re: Help with eagle cad and chili pepper

thinks to xpix for his Post it helped me get the holes generated his thread is here

http://www.shapeoko.com/forum/viewtopic.php?f=28&t=1045
by op117
Fri Jul 10, 2015 6:09 am
Forum: PCB Fabrication
Topic: Help with eagle cad and chili pepper
Replies: 1
Views: 1208

Help with eagle cad and chili pepper

i have my board designed and it makes the traces in chili pepper but it does not make the hole for the components to be sodderd in to...

i think im missing a simple step just started with eagleCad.....
by op117
Sat Jun 13, 2015 6:06 am
Forum: Electronics
Topic: nema 17 heat problem
Replies: 5
Views: 754

Re: nema 17 heat problem

im thinking of getting heatsinks 4x http://www.amazon.com/gp/product/B00N419ABM/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=A3AZW35WSKZ6W8 cutting to size for motor driver board and the motos thim selfs and 2x http://www.amazon.com/40mmx10mm-Blades-Computer-Chipset-Cooling/dp/B00K85C4AG/ref=sr_1_3?s=el...
by op117
Sat Jun 13, 2015 2:24 am
Forum: Electronics
Topic: nema 17 heat problem
Replies: 5
Views: 754

nema 17 heat problem

whats the best way to cool down the nema 17 motors? The ambient temp is around 90F and i have thermal shut at every job, also cooling the air is not a potion for my shop at the moment... whats the best heat sinks, fans , and config of eater... would be awesome to put a radiator like a h100 with cust...