Search found 15 matches

by Okinawanwinds
Sun Sep 20, 2015 1:16 pm
Forum: Build Logs
Topic: SO3 #751 build
Replies: 4
Views: 1826

Re: SO3 #751 build

I see.,
at first I need milling PCB for my electronics.
So Eagle Cad and Estlcam and Chilipeppr combination I'll try soon.


Okinawanwind(s)
Shapeoko3 #751 from Sept.19, 2015
by Okinawanwinds
Sun Sep 20, 2015 9:07 am
Forum: Build Logs
Topic: SO3 #751 build
Replies: 4
Views: 1826

Re: SO3 #751 build

this is from the traditional Shapeoko's HelloWorld data, provided @
http://docs.shapeoko.com/helloworld.html

(^_-)


Okinawanwind(s)
Shapeoko3 #751 from Sept.19, 2015
by Okinawanwinds
Sat Sep 19, 2015 2:15 pm
Forum: Build Logs
Topic: SO3 #751 build
Replies: 4
Views: 1826

SO3 #751 build

Today I start producing by this machine and for a first job I drew a Hello World logo. (^ー^)ノ http://images.tapatalk-cdn.com/15/09/19/08ab4ed1bc08299feeb5ce484b2d47ac.jpg While I built I learned how difficult to design CNC. Thank you for my nice machine Shapeoko team! (^_-) Okinawanwind(s) Shapeoko3...
by Okinawanwinds
Sat Sep 19, 2015 1:29 am
Forum: Shapeoko 3 Assembly
Topic: Missing Ny-Loc Nuts?
Replies: 4
Views: 1263

Re: Missing Ny-Loc Nuts?

So as I, then I locked them with JET-LOK and it works no prob.

There're some mistakes like this on manual. I hope it rewrite soon.


Sent from my iPhone using Tapatalk
by Okinawanwinds
Wed Sep 16, 2015 5:20 pm
Forum: Shapeoko 3 Assembly
Topic: Tapped holes in gantry to attach controller
Replies: 10
Views: 1651

Re: Tapped holes in gantry to attach controller

I had a same problem and I fixed them by wrapping those bolts with aluminum foil tape and tightened the screws. It seems good at now for me.


Sent from my iPhone using Tapatalk
by Okinawanwinds
Wed Sep 16, 2015 5:08 pm
Forum: Shapeoko 3 Assembly
Topic: Some Y-axis travel questions
Replies: 13
Views: 2601

Re: Some Y-axis travel questions

and I found the belt end handling is wrong at belt clip slots.


Sent from my iPhone using Tapatalk
by Okinawanwinds
Wed Sep 16, 2015 10:55 am
Forum: Shapeoko 3 Assembly
Topic: Some Y-axis travel questions
Replies: 13
Views: 2601

Re: Some Y-axis travel questions

I think so as WillAdams.
You need to loosen base frames all bolts include of waste boards, and check the extruder-edges right angle then reconstruct with sets of squares.


Sent from my iPhone using Tapatalk
by Okinawanwinds
Tue Sep 15, 2015 8:10 am
Forum: Shapeoko 3 Assembly
Topic: Some Y-axis travel questions
Replies: 13
Views: 2601

Re: Some Y-axis travel questions

CNCRob wrote:
The Y rails (extrusions) are tightly fastened to the frame end plates, no gaps there.
There are some spaces at the Y plates holes so we can use them to calibrate the squareness.
by Okinawanwinds
Tue Sep 15, 2015 12:42 am
Forum: Mach3
Topic: Change tool & tool length compensation
Replies: 9
Views: 10844

Re: Change tool & tool length compensation

M05 stops the spindle (if it is controlled by Mach3) M00 stops the machine so you can change the tool M03 restarts the spindle Usually your CAM program should do this for you automatically if you use more than one tool. The tool change itself with tool length compensation works this way: After M00 ...
by Okinawanwinds
Mon Sep 14, 2015 12:10 pm
Forum: Tooling & Fixtures
Topic: SO3 Machining Aluminum
Replies: 40
Views: 11028

Re: SO3 Machining Aluminum

congrats, and tell me how do you protect from flying broken end-mill bit?


Sent from my iPhone using Tapatalk