Search found 37 matches

by grep
Thu Feb 01, 2018 2:08 am
Forum: Electronics
Topic: Controlling a relay via gcode, ie. for cooling, using M8, M9
Replies: 1
Views: 830

Re: Controlling a relay via gcode, ie. for cooling, using M8

Here is the info I got from Carbide3D : Disclaimer : This is for 2.4D board. Hooking up a 3rd party device will void the warranty. There are no on board relays that would let you hook that up, you'd have to put something together. There is also no convenient place to grab 24V from the board but I'm ...
by grep
Fri Jan 26, 2018 7:37 pm
Forum: Electronics
Topic: Controlling a relay via gcode, ie. for cooling, using M8, M9
Replies: 1
Views: 830

Controlling a relay via gcode, ie. for cooling, using M8, M9

Hi all, I am in the process of hooking up an electrical solenoid valve, in order to blow air on the bit. I have a 24VDC valve (https://www.mettleair.com/store/valves/sv/esc2w2p/2-way-valve-1-4-npt-wire-leads-dc-24v.html) and a 2.4 controller board. The idea is to use M8 and M9 to turn it on and off....
by grep
Sun Nov 26, 2017 5:39 am
Forum: Shapeoko 3 Assembly
Topic: Waste Board Dimensions
Replies: 56
Views: 15859

Re: Waste Board Dimensions

Hi Will, thanks for the answer. I don't understand the whole story. Of course I can enlarge the holes, what i don't get now is why is a wrong design is still shared and who is this "someone", i guess i missed a bit...
by grep
Sun Oct 15, 2017 9:07 pm
Forum: Shapeoko 3 Assembly
Topic: Waste Board Dimensions
Replies: 56
Views: 15859

Re: Waste Board Dimensions

We just sent RAWINDESIGN's file for fabrication, and realised the dimensions are WRONG !!!!! When you look at Edward's drawing, there is 679.64-37.91=641.73mm from one left fixation screw to the one on the right. On RAWINDESIGN's file, he specifies 640mm. Which is a difference of 1.73mm and well, ho...
by grep
Sat Aug 05, 2017 12:20 am
Forum: Shapeoko 3 Assembly
Topic: v-wheels technical drawing
Replies: 4
Views: 359

Re: v-wheels technical drawing

I'm tempted to think the delrin wheel design is the same, but the difference is in the outer diameter of the precision washer
by grep
Tue Aug 01, 2017 10:15 pm
Forum: Shapeoko 3 Assembly
Topic: v-wheels technical drawing
Replies: 4
Views: 359

Re: v-wheels technical drawing

@Willadams thanks! Can they share the new design?
by grep
Tue Aug 01, 2017 6:40 pm
Forum: Shapeoko 3 Assembly
Topic: v-wheels technical drawing
Replies: 4
Views: 359

v-wheels technical drawing

hi there :)

I was wondering, as the shapeoko 3 is open hardware, if there is a technical drawing for the v-wheels used by the shapeoko 3. I looked everywhere, couldn't find it.

Thanks
by grep
Fri Feb 05, 2016 4:57 pm
Forum: Trim Routers
Topic: know the RPM of your router with your phone
Replies: 2
Views: 1562

Re: know the RPM of your router with your phone

Yes i didńt buy anything i use it regularly
by grep
Wed Feb 03, 2016 2:06 am
Forum: Trim Routers
Topic: know the RPM of your router with your phone
Replies: 2
Views: 1562

know the RPM of your router with your phone

There's a free app called Giri (iphone/android) which tells you the RPM of any motor around you, by listening to the motor running via your phone's microphone. Works like a charm with the Dewalt DWP611. If you don't have a smartphone, a friend of mine used Ableton. Let's say you want to set it to 22...