Search found 48 matches

by UltiArjan
Fri Nov 04, 2016 7:34 pm
Forum: Tooling & Fixtures
Topic: 3D printed step blocks
Replies: 4
Views: 985

Re: 3D printed step blocks

I like the Makita, use it mostly with the Elaire collect (could not find a 1/8" in Europe) but to be honest I can't compare as I never had anything else on the SO3....
by UltiArjan
Sun Sep 04, 2016 6:58 pm
Forum: Tooling & Fixtures
Topic: dust shoe updated for new SO3 Zplate
Replies: 0
Views: 573

dust shoe updated for new SO3 Zplate

FYI, updated my dust shoe design to accommodate the new Z plate. You can still find it here for download; https://www.youmagine.com/designs/shapeoko3-dust-shoe-with-quick-release-v2 sucker1.jpg sucker2.jpg and I used a few wedges to tighten the Z belt again, also printed these; https://www.youmagine...
by UltiArjan
Tue Aug 30, 2016 7:21 pm
Forum: Tooling & Fixtures
Topic: 3D printed step blocks
Replies: 4
Views: 985

3D printed step blocks

FYI, just uploaded some 3d printable step blocks. Main objectives; the bolt falls into the block so it can stay close to the piece it's holding, the thing is relatively low to stay out of the way of my dust suction. https://www.youmagine.com/designs/low-profile-step-block-clamps-for-cnc 1XS.jpg 2XS....
by UltiArjan
Sat Apr 23, 2016 4:21 pm
Forum: Build Logs
Topic: Shapeoko3 #1331 - Europe, The Netherlands
Replies: 24
Views: 5996

Re: Shapeoko3 #1331 - Europe, The Netherlands

Finally managed to replace the printed makita adaptor for a decent aluminium one. Got some 60mm diameter , 2 mm thick tubing here: https://www.aluminiumopmaat.nl/aluminium-buizen/aluminium-buis-rond.html The 2 mm was to much, good not get it in, so I had a company take of 0.25mm on the lathe and now...
by UltiArjan
Tue Mar 29, 2016 10:35 pm
Forum: Member Projects
Topic: made a tail light for a motor cycle i am building
Replies: 5
Views: 843

Re: made a tail light for a motor cycle i am building

Nice!
As I'm a beginner, still on the look for my prefered CAM software, how do you like CAMBAM ? any pro's / con's ?
by UltiArjan
Thu Mar 24, 2016 11:18 pm
Forum: Build Logs
Topic: Shapeoko3 #1331 - Europe, The Netherlands
Replies: 24
Views: 5996

Re: Shapeoko3 #1331 - Europe, The Netherlands

hmm... actually I consider these prints very rough, just prints with a big 0.6 nozzle and 0.2 layer... normal quality on an Ultimaker is much better....
by UltiArjan
Tue Mar 22, 2016 11:20 am
Forum: Build Logs
Topic: Shapeoko3 #1331 - Europe, The Netherlands
Replies: 24
Views: 5996

Re: Shapeoko3 #1331 - Europe, The Netherlands

I loose a little on Y, but that doesn't bother me at all. The setup is easy to remove should I ever need the full Y size.
The setup can probably be made a tiny bit more compact on the left, but I'm not going to be bothered by it now, maybe later... who knows ...
by UltiArjan
Mon Mar 21, 2016 10:46 am
Forum: Member Projects
Topic: Apple Watch Stand & iPhone Dock
Replies: 5
Views: 1245

Re: Apple Watch Stand & iPhone Dock

love the combination of materials !
by UltiArjan
Mon Mar 21, 2016 9:27 am
Forum: Discussion
Topic: Router interference\Spindle size for SO3
Replies: 5
Views: 440

Re: Router interference\Spindle size for SO3

I'm running a similar setup, 2.3 board & Makita. Since I got the 2.3 board I have not had any disconnects (but I did no do any supper long jobs). I did not do any complicated stuff, no special grounding etc.. The only thing I can think of being different are: - I twisted all motor cables - I run fro...
by UltiArjan
Sun Mar 20, 2016 8:03 pm
Forum: Discussion
Topic: Brush for dust shoe in europe
Replies: 8
Views: 683

Re: Brush for dust shoe in europe

I could also only find stiff brushes, so I made a dust shoe that's not moving up and down with the router, I think it works pretty nice. Also added a quick release for easy height adjustment and tool change; https://www.youmagine.com/designs/shapeoko3-dust-shoe-with-quick-release http://www.shapeoko...