The Shapeoko Forum

Nice! Looks like mine: https://lh3.googleusercontent.com/JoW7UUgsAXR6mKpbc-pjoIDTq_al31jnQaQJ1Q-yuwv_L3t9A6Shpkp2GNFjVRNPWSynfnmCLEBEZCkhC2S35udWjWEA9x8-x-8bmlLOrcJe9BHlGrLoSNt0NDrqkH50LYCrSjxB0g2jdqKyhPwnSGKu97CDMUUSNVMyOLvfHj1yWvM1dEyHehsnKoAer3WOTKBtXTV4-xia0gngUIBEO0QwFQtBFFPGx08DLh4JFmeCrpauXWU...

Your Linear Slide CNC Router Actuator is pretty sweet http://www.manmademayhem.com/?p=2199
But it is almost 2Kg. How is that compared to your old parts?

Really nice work!
I might try to make this one to use with my spare Makita in case the Kress poops out at the wrong moment.

Your link has an extra 2 at the end: http://www.manmademayhem.com/?p=2325

Really nice font and work..

I heard it was a trick to put on some laquer first, before painting the letters, so the paint won't be sucked into the wood.
Have not tried it myself yet..

LTEPM wrote:Would the Raspberry Pi Zero be able to handle streaming a USB camera?

RPi Zero is as capable as RPi 1, I think.
But the lack of network connection and regular USB connector for Wifi plug makes the "normal" RPi layout more suitable?

Nice!
Was it difficult to hold it down securly?

The biggest issue with breaking the bits is that the bit is so thin, that even with the precision of the SO3, it is still obvious which lines were cut twice, so I try to break the bit only by sliding my hand into it and slicing my finger open when I am wiping dust off the spoilboard between jobs. I...

How fast can you run this 0.0120" bit on wood? That is about 0.3mm?

Really nice!
I may have to adapt that one..

Hi!

I do control my Solid State Relay with the motor on/off pin from the Arduino Uno and it works perfectly.
https://github.com/grbl/grbl/wiki/Connecting-Grbl