The Shapeoko Forum

FattyMatty, Please add more pictures. I'm also in an apartment, worried about neighbor complaints.

Thanks Rob. I will check that. What bothered me most was number "2" is thick. I made sure the pen is rigid, however will check it again just in case.

I ran hello world and got this result. I try to figure out why the second "O" is not thick as the first "O".

Does this mean, I should work more on tuning the machine

(I took the photo in an angle).

Thanks

Ruwan.

IMHO, the deal went well with USA customers. For Canada, the shipping(+other costs) almost killed the deal. USA shipping was around $25. Canada shipping was over $100.

Thanks.

1. I used a framing square to get the Y perpendicular to the front extrusion. You will probably need some sort of spacer block to get around the end plate. I used a spare piece of extrusion. 2. If you Y axis rails are perpendicular to the front rail, then you can just push the gantry all the way fo...

Sorry if these are obvious questions, however I'm stuck in squaring my machine. I've been reading instructions on squaring, specially IC's method. 1. How do we make sure we get 90 degrees between a Y axis and the front black extrusion (or waste board)? What are the tools used? 2. How do we make sure...

Thanks guys!

For plywood what would be the thickness recommended?

J.

Thanks Edward! I would definitely like to try that out.

Thanks guys!