Dewalt DW660 Mounts for ShapeOko 2

Post Reply
chambrot
Posts: 27
Joined: Mon Sep 30, 2013 2:55 pm
Location: Miami, FL
Contact:

Dewalt DW660 Mounts for ShapeOko 2

Post by chambrot » Wed Jan 22, 2014 2:01 am

Anyone know where is can get a set of these mounts? They are sold out in the ShapeOko store.

http://shop.shapeoko.com/collections/fr ... 660-mounts

Or a link to the drawings would be great also, all the drawings i find are for the ShapeOko 1 that doesnt allow for clearance of the top of the router.

Thanks
Custom ShapeOko using original design, 1000mm MakerSlide X Axis, Double 1000mm MakerSlide Y Axis, Nema 23 on all, upgraded Z Axis, Dremel 300, controlled by TinyG

WillAdams
Posts: 8616
Joined: Mon Apr 09, 2012 6:11 pm
Location: Pennsylvania --- south of the Turnpike, East of US-15
Contact:

Re: Dewalt DW660 Mounts for ShapeOko 2

Post by WillAdams » Wed Jan 22, 2014 4:47 pm

Have you considered just taking the drawings, measuring them in relation to the machine and then adding on the needed material to the shape before cutting it?
Shapeoko 3XL #0006 w/ Carbide Compact Router w/0.125″ and ¼″ Carbide 3D precision collets

chambrot
Posts: 27
Joined: Mon Sep 30, 2013 2:55 pm
Location: Miami, FL
Contact:

Re: Dewalt DW660 Mounts for ShapeOko 2

Post by chambrot » Wed Jan 22, 2014 9:41 pm

Yes. I have considered that...i just thought it there was a set that was already designed, why redesign the wheel.

I have the HPDE on order so once I get it I will attempt some of my own design.

Do you think it would be as simple as taking the existing design and just adding the separation from the z-axis?
Custom ShapeOko using original design, 1000mm MakerSlide X Axis, Double 1000mm MakerSlide Y Axis, Nema 23 on all, upgraded Z Axis, Dremel 300, controlled by TinyG

Post Reply