Ultimate shapeoko dust shoe

discussion of design changes / improvements / suggestions
Post Reply
Posts: 1
Joined: Thu Jan 26, 2017 7:34 am

Ultimate shapeoko dust shoe

Post by leo.cecchin » Fri Jan 27, 2017 10:42 am

Hi everyone, this is the design that I made for my shapeoko dust shoe, since my spindle is a Makita router air cooled I needed to design a mount that was able to deviate the airflow away from the bit so that the shop vac would be able to suck dust, I also wanted to be able to mount and unmount it quickly, so I went for this magnetic atachment. in these days I'm going to test it.
WP_20170124_20_56_49_Pro.jpg (955.8 KiB) Viewed 1636 times
WP_20170124_20_56_21_Pro.jpg (892.42 KiB) Viewed 1636 times
render.jpg (50.29 KiB) Viewed 1636 times

Posts: 196
Joined: Tue Sep 11, 2012 7:48 am
Location: Bergen, Norway

Re: Ultimate shapeoko dust shoe

Post by zerblatt007 » Mon Jan 30, 2017 12:13 pm


Looks like mine: Image

I am very satisfied with it and it sucks up almost everything.
If only it was see-trough it would be perfect.. :)
Shapeoko #958: Dual-Y drive, Double-X, Belt on outside, 1m Y-Axis, Acme Z, Opened up and boxed in. Kress 1050 Spindle.

Post Reply