For sale: Shapeoko 3 XXL in Pennsylvania

sell your stuff here
Forum rules
Only legal items and items related to CNC projects are eligible to be advertised through this forum. if your item for sale is deemed to be not fit for the forum it will be removed without warning by one of the moderators.
Post Reply
mhartman28
Posts: 1
Joined: Mon Oct 14, 2019 8:20 pm

For sale: Shapeoko 3 XXL in Pennsylvania

Post by mhartman28 » Thu Jul 29, 2021 10:22 pm

I’m selling my Shapeoko 3 XXL. Purchased in 2019, I used it for about 6 months with plans to “get back to it”. Now we’re down sizing and will no longer have room.
The machine is “dialed in” and cuts very accurately. It is mounted to the included sturdy base through the base plates on the Shapeoko. This was done to make the plates flat and level, this greatly facilitated assembly and accuracy. The base has a slide-out shelf for a laptop or small keyboard and a drawer for holding cutters and spare parts. The base has adjustable feet for easy and accurate leveling. Base measurements are 40” H x 43” D x 48” W.
Included also is a Carbide 3D router, bit setter, bit zero, IoT Relay from Digital Loggers, 51 cutters (see list below), Waste board with 1/4-20 threads for clamping projects, 8- Oops clamps w/ extra ends, Suck-it dust boot, and many spare parts.
Everything included for $1,500.

PICKUP ONLY- Located in South Central PA. I highly recommend that the CNC and base stay as one unit to insure accuracy. The complete unit can be lifted directly into a box truck or pickup truck.
List of cutters:

5- Nomad #122, .032”
2- Amana 42642-K, 1/32”
2- Amana 46213-K, 1/16”
5- generic 1/8”, 4- flute upcut
3- generic 1/8”, 2-flute upcut
10- generic 1/8”, 2-flute upcut
8- generic 1/8”, O flute upcut (for plastic).
1- United Stamping 1/4” shank, 90 degree spring-loaded diamond drag bit.
1- Whiteside #1541, 1/4” “V” cutter
1- Freud #73-206, 1/4”
3- Nomad #201, 1/4”
2- Amana #46202-K, 1/4”
1-Amana #46475, 1/4” ball
2- Onsrud #63-776, 1/4”
2- Nomad #301, 1/2” 90 degree “V” cutter.
2- Nomad #302, 1/2” 60 degree “V” cutter.
1- 1” dia. Flat-bottom (for flattening spoil board).
Image
Attachments
Rout.jpg
Rout.jpg (93.97 KiB) Viewed 400 times
3XXL.jpg
3XXL.jpg (122.23 KiB) Viewed 400 times

fsmith246
Posts: 11
Joined: Sun Mar 21, 2021 2:37 pm

Re: For sale: Shapeoko 3 XXL in Pennsylvania

Post by fsmith246 » Sun Aug 08, 2021 5:42 pm

Did you receive my pm?
Thanks
Frank

Post Reply