SOLD - PJ Spindle - SOLD

sell your stuff here
Forum rules
Only legal items and items related to CNC projects are eligible to be advertised through this forum. if your item for sale is deemed to be not fit for the forum it will be removed without warning by one of the moderators.
BrianTK
Posts: 19
Joined: Mon Jul 07, 2014 2:07 pm
Location: Stanardsville Va

SOLD - PJ Spindle - SOLD

Post by BrianTK » Tue Sep 02, 2014 2:20 pm

I have one of these for sale.Two extra bands and the allen tool. Awesome part , I have gone to a Makita.
$40 plus shipping.
Brian

sloucks
Posts: 6
Joined: Sat Sep 20, 2014 7:55 am

Re: PJ Spindle

Post by sloucks » Sat Sep 20, 2014 2:21 pm

Is this the er-11 version and is it complete with motor?

BrianTK
Posts: 19
Joined: Mon Jul 07, 2014 2:07 pm
Location: Stanardsville Va

Re: PJ Spindle

Post by BrianTK » Sat Sep 20, 2014 2:30 pm

It is not the er-11 version , it is the early version . It fits a .125 diameter bit.
It is complete with everything that came with it. Motor , belts, allen tools. It works great.
Regards
Brian

sloucks
Posts: 6
Joined: Sat Sep 20, 2014 7:55 am

Re: PJ Spindle

Post by sloucks » Sat Sep 20, 2014 5:34 pm

What rating power supply is required to run the motor? I'm interested in it.

BrianTK
Posts: 19
Joined: Mon Jul 07, 2014 2:07 pm
Location: Stanardsville Va

Re: PJ Spindle

Post by BrianTK » Sat Sep 20, 2014 8:11 pm

Just plug it into a 110/115 outlet and your good to go. I had it on a power strip so I had the functionality of a switch. The AC power cord is still on the motor.

sloucks
Posts: 6
Joined: Sat Sep 20, 2014 7:55 am

Re: PJ Spindle

Post by sloucks » Sun Sep 21, 2014 8:21 pm

I can't seem to send a pm with my shipping info, but I'm interested in purchasing it from you.

cvoinescu
Posts: 4442
Joined: Thu Jul 19, 2012 6:50 pm
Location: Camberley, UK
Contact:

Re: PJ Spindle

Post by cvoinescu » Sun Sep 21, 2014 9:58 pm

Write two more posts, and you will be able to PM.
Proud owner of ShapeOko #709, eShapeOko #0, and of store.amberspyglass.co.uk

sloucks
Posts: 6
Joined: Sat Sep 20, 2014 7:55 am

Re: PJ Spindle

Post by sloucks » Mon Sep 22, 2014 12:13 am

One

sloucks
Posts: 6
Joined: Sat Sep 20, 2014 7:55 am

Re: PJ Spindle

Post by sloucks » Mon Sep 22, 2014 12:15 am

Two

sloucks
Posts: 6
Joined: Sat Sep 20, 2014 7:55 am

Re: PJ Spindle

Post by sloucks » Mon Sep 22, 2014 5:33 am

PM Sent

Post Reply