sell your stuff here
Forum rules
Only legal items and items related to CNC projects are eligible to be advertised through this forum. if your item for sale is deemed to be not fit for the forum it will be removed without warning by one of the moderators.
-
Fablicator
- Posts: 114
- Joined: Thu Jul 02, 2015 7:59 pm
Post
by Fablicator » Mon Sep 28, 2015 7:36 pm
heathenx wrote:That's a pretty nifty probing connection.
Thanks! It really makes it easy to use a variety of probes with minimal switch over time.
Byboth wrote:Nice kit. Any possibility of ahipping to norway, or should I just use a 3rd party carrier?
Just added Norway to my shipping options. 15.95 flat rate.
-
GoSpeedRacer
- Posts: 61
- Joined: Mon Apr 20, 2015 12:22 am
Post
by GoSpeedRacer » Tue Sep 29, 2015 3:52 am
This is on my list along with a few other bits when I get ready to build mine. Very well thought out.
-
apspurgeon
- Posts: 122
- Joined: Mon Jun 08, 2015 9:18 am
Post
by apspurgeon » Wed Sep 30, 2015 5:46 am
Hmm....still trying to figure out what software I'd need to make sure of the limited switches, and probe? I'm assuming Carbide motion doesn't 'support'?
-
WillAdams
- Posts: 8618
- Joined: Mon Apr 09, 2012 6:11 pm
- Location: Pennsylvania --- south of the Turnpike, East of US-15
-
Contact:
Post
by WillAdams » Wed Sep 30, 2015 10:35 am
Carbide Motion doesn’t provide buttons for this functionality, but one can use the MDI window to type and send the commands.
bCNC does provide buttons for this, as do other programs.
Shapeoko 3XL #0006 w/ Carbide Compact Router w/0.125″ and ¼″ Carbide 3D precision collets
-
GoSpeedRacer
- Posts: 61
- Joined: Mon Apr 20, 2015 12:22 am
Post
by GoSpeedRacer » Fri Oct 09, 2015 10:57 pm
I just received my kit today and it looks fantastic! Unfortunately it will be quite a while before I set up my machine but at least I have it ready now! Very professional and quick shipping.
-
human
- Posts: 2
- Joined: Mon Aug 03, 2015 10:06 pm
Post
by human » Sat Oct 10, 2015 1:06 am
Just wanted to add my feedback on the kit. Everything arrived nicely packaged. The switches functioned very consistently and appears to be accurate to within 0.03mm based on a few tests. The 3D printed parts were very well done and fits perfectly. Thank you!
lawrence
-
apspurgeon
- Posts: 122
- Joined: Mon Jun 08, 2015 9:18 am
Post
by apspurgeon » Sat Oct 10, 2015 4:08 am
Thanks, if I use the MDI window what are the commends to zero the axis?
-
WillAdams
- Posts: 8618
- Joined: Mon Apr 09, 2012 6:11 pm
- Location: Pennsylvania --- south of the Turnpike, East of US-15
-
Contact:
Post
by WillAdams » Sat Oct 10, 2015 10:00 am
The commands are documented on the wiki, but it seems to be best to just use bCNC for homing operation:
http://www.shapeoko.com/forum/viewtopic.php?f=7&t=6579Shapeoko 3XL #0006 w/ Carbide Compact Router w/0.125″ and ¼″ Carbide 3D precision collets
-
Fablicator
- Posts: 114
- Joined: Thu Jul 02, 2015 7:59 pm
Post
by Fablicator » Tue Oct 13, 2015 2:59 pm
GoSpeedRacer wrote:I just received my kit today and it looks fantastic! Unfortunately it will be quite a while before I set up my machine but at least I have it ready now! Very professional and quick shipping.
human wrote:Just wanted to add my feedback on the kit. Everything arrived nicely packaged. The switches functioned very consistently and appears to be accurate to within 0.03mm based on a few tests. The 3D printed parts were very well done and fits perfectly. Thank you!
lawrence
Excellent!
As of this morning, all orders have been shipped!
-
Fablicator
- Posts: 114
- Joined: Thu Jul 02, 2015 7:59 pm
Post
by Fablicator » Sun Oct 18, 2015 7:53 pm
Instructions for the Limit Switches and Probe are now finished, and located
here
Blue colored kits are now back in stock as well.