Shapeoko threaded table announced (again)

sell your stuff here
Forum rules
Only legal items and items related to CNC projects are eligible to be advertised through this forum. if your item for sale is deemed to be not fit for the forum it will be removed without warning by one of the moderators.
Dave Durant
Posts: 89
Joined: Tue Mar 17, 2015 6:00 pm
Location: MA, USA

Re: Shapeoko threaded table announced (again)

Post by Dave Durant » Tue Feb 02, 2016 3:56 am

The current round announced in the email last week (edit: 1/26/2016) should ship out this week, yes?

FabricatorCraig
Posts: 58
Joined: Fri Jul 27, 2012 3:17 am

Re: Shapeoko threaded table announced (again)

Post by FabricatorCraig » Sat Feb 06, 2016 12:53 pm

I'm sort of wondering the same thing....I sent a "prodding" email a number of days ago and haven't heard anything back from Carbide on the matter. Aside from stopping the taking of additional pre-orders (I jumped on one as soon as they announced the current batch), they've been strangely silent on the subject. Given that the original vendor refused to take on a reorder, I'm hoping that the new vendor hasn't run into issues as well that will impact delivery and/or quality of the resulting table.
-----------------Craig The Fabricator-----------------
SO1 - (1) Red Powder-Coat & (1) Non-Painted Steel
SO2 - (2) w/ lots of I.C. & other upgrades
SO3 - Serial #447

Dave Durant
Posts: 89
Joined: Tue Mar 17, 2015 6:00 pm
Location: MA, USA

Re: Shapeoko threaded table announced (again)

Post by Dave Durant » Fri Feb 12, 2016 5:15 pm

Got a shipping notice! Woohoo!

FabricatorCraig
Posts: 58
Joined: Fri Jul 27, 2012 3:17 am

Re: Shapeoko threaded table announced (again)

Post by FabricatorCraig » Fri Feb 12, 2016 8:39 pm

Same here. Received the tracking info email today. Going UPS ground...meaning end of next week best case.
-----------------Craig The Fabricator-----------------
SO1 - (1) Red Powder-Coat & (1) Non-Painted Steel
SO2 - (2) w/ lots of I.C. & other upgrades
SO3 - Serial #447

Dave Durant
Posts: 89
Joined: Tue Mar 17, 2015 6:00 pm
Location: MA, USA

Re: Shapeoko threaded table announced (again)

Post by Dave Durant » Sat Feb 13, 2016 8:22 pm

UPS says mine will be here on Wednesday, which isn't bad at all, IMO. Hope yours isn't going to go to (or past!) next weekend.

FabricatorCraig
Posts: 58
Joined: Fri Jul 27, 2012 3:17 am

Re: Shapeoko threaded table announced (again)

Post by FabricatorCraig » Sat Feb 13, 2016 10:20 pm

Well, now that UPS has picked it up, it's showing Wednesday for mine as well. For some reason, I thought it was coming from the West Coast rather than Illinois. Usually 2 business days to Austin from Illinois rather than 4 or 5 coming from Cali. Hoping this new vendor they picked came through...
-----------------Craig The Fabricator-----------------
SO1 - (1) Red Powder-Coat & (1) Non-Painted Steel
SO2 - (2) w/ lots of I.C. & other upgrades
SO3 - Serial #447

Dave Durant
Posts: 89
Joined: Tue Mar 17, 2015 6:00 pm
Location: MA, USA

Re: Shapeoko threaded table announced (again)

Post by Dave Durant » Tue Feb 16, 2016 11:07 pm

Mine showed up a day early - it looks great!

No hold-downs, though. It's just the table. Bit disappointed by that but I ain't sending it back..

FabricatorCraig
Posts: 58
Joined: Fri Jul 27, 2012 3:17 am

Re: Shapeoko threaded table announced (again)

Post by FabricatorCraig » Wed Feb 17, 2016 1:12 am

Very nice. Mine seems to be in transit still with a still-scheduled arrival tomorrow hopefully...

Does it include new (longer?) screws to tie it in to the SO3 framing rails? Or is the expectation that the original hardware will work from the stock MDF table?
-----------------Craig The Fabricator-----------------
SO1 - (1) Red Powder-Coat & (1) Non-Painted Steel
SO2 - (2) w/ lots of I.C. & other upgrades
SO3 - Serial #447

Dave Durant
Posts: 89
Joined: Tue Mar 17, 2015 6:00 pm
Location: MA, USA

Re: Shapeoko threaded table announced (again)

Post by Dave Durant » Wed Feb 17, 2016 1:40 am

FabricatorCraig wrote:Does it include..
It includes a cardboard box, bit of foamy packing stuff and the table itself.

heathenx
Posts: 114
Joined: Thu Apr 02, 2015 10:59 am

Re: Shapeoko threaded table announced (again)

Post by heathenx » Wed Feb 17, 2016 12:16 pm

Received mine on Monday (Indiana) and installed it last night. Looks great!
Shapeoko 3, #405 / Dewalt 611 w/Super PIDv2, limit switches

Post Reply