Wanted: Proxxon mount printed or cut.

sell your stuff here
Forum rules
Only legal items and items related to CNC projects are eligible to be advertised through this forum. if your item for sale is deemed to be not fit for the forum it will be removed without warning by one of the moderators.
Post Reply
madmike88
Posts: 52
Joined: Mon Nov 05, 2012 4:10 pm

Wanted: Proxxon mount printed or cut.

Post by madmike88 » Tue Nov 06, 2012 5:23 am

Hi, I'm waiting for my Shapeoko kit to come in, and I bought a proxxon IB/E to use as my Spindle. I'd like to have the mount linked below cut or printed.

Thanks

Mike

djaco wrote:I just uploaded my 3D-printable spindle mount for the Proxxon IB/E.

http://www.thingiverse.com/thing:29776

cvoinescu
Posts: 4442
Joined: Thu Jul 19, 2012 6:50 pm
Location: Camberley, UK
Contact:

Re: Wanted: Proxxon mount printed or cut.

Post by cvoinescu » Tue Nov 06, 2012 2:06 pm

Look for something like this. It's a support for round rail for larger linear bearing systems, but it has the same 20mm diameter as the Proxxon and works very well. It's often called a "SK20", so it may be useful to search for that.
Proud owner of ShapeOko #709, eShapeOko #0, and of store.amberspyglass.co.uk

goopyplastic
Posts: 24
Joined: Wed Jul 25, 2012 4:35 pm

Re: Wanted: Proxxon mount printed or cut.

Post by goopyplastic » Tue Nov 06, 2012 9:13 pm

I can print parts out for those who are interested.

madmike88
Posts: 52
Joined: Mon Nov 05, 2012 4:10 pm

Re: Wanted: Proxxon mount printed or cut.

Post by madmike88 » Tue Nov 06, 2012 9:27 pm

goopyplastic wrote:I can print parts out for those who are interested.
Yes! I'm interested...

goopyplastic
Posts: 24
Joined: Wed Jul 25, 2012 4:35 pm

Re: Wanted: Proxxon mount printed or cut.

Post by goopyplastic » Tue Nov 06, 2012 10:23 pm

I will try printing one out tonight but I'm guessing $7.50 + $2 shipping to the lower 48. Since it is a solid block and printed flat there may be a little warping at the edges but I doubt it will cause issues. I will upload pics when I have them, also if people need special sizes etc. I can create parts as well pretty easily. I would like to offer printing services for a number of shapeoko accessories so feel free to send me ideas of parts you might find useful.

madmike88
Posts: 52
Joined: Mon Nov 05, 2012 4:10 pm

Re: Wanted: Proxxon mount printed or cut.

Post by madmike88 » Wed Nov 07, 2012 4:54 am

That sounds good to me.

madmike88
Posts: 52
Joined: Mon Nov 05, 2012 4:10 pm

Re: Wanted: Proxxon mount printed or cut.

Post by madmike88 » Sat Nov 10, 2012 5:15 pm

Goopy, I got my proxxon mount in today. It looks awesome.

Thanks

Mike

Post Reply