Page 1 of 1

Brackets for custom builds

Posted: Fri Feb 08, 2019 3:08 am
by Enraged
IMG_1155.JPG (159.35 KiB) Viewed 1730 times
I had these made awhile ago for my own machine, I ended up getting a batch of 50 cut. They were cut on a mill and deburred. Material is 1/8" 6061 aluminum. I'll sell any number of them, I have a 46 left.

The hole pattern is designed around using standard 20mm x 40mm extrusions. The holes are 5.5mm and 4.5mm.

I used these to bolt Makerslide extrusions to a 20x80 side rail and a 20x40 cross rail. I used 4 on my machine, one for each corner.

Asking $5 per bracket, I'll offer discounts for multiples, just send me a PM with how many you'd like. Buyer pays for shipping but if you want multiple we can work out a fair deal.

I'm in Victoria BC Canada, I'll ship them with Canada Post. I've attached a PDF with dimensions.

Re: Brackets for custom builds

Posted: Thu Feb 28, 2019 5:11 pm
by twforeman
Can you post a photo (or point to a forum post) that shows how you used these?

Re: Brackets for custom builds

Posted: Thu Feb 28, 2019 5:52 pm
by GerryAttrick
Can you post a link to the Makerslide extrusions you used with these brackets?

Re: Brackets for custom builds

Posted: Sun Mar 17, 2019 5:45 pm
by Enraged
My machines currently disassembled, but here's a pic where it mounts:
IMG_1425.JPG (329.04 KiB) Viewed 1471 times
Makerslide mounts to the bracket on the top right, facing away from the workspace.

I bought my makerslide years ago during the first group buy, so I'm not sure who's selling it now. I've been out of the hobby for awhile.