Was thinking about this --- seems we could have discrete tutorials for each stage of the process and then link them together arbitrarily, e.g., we have tutorials for both OpenSCAD and FreeCAD, both of which output to .stl --- we could then have multiple tutorials for CAM files which accept STL as input.
So, we'd have:
- Tutorial_CAD_3D_<projectname>_stl_OpenSCAD
- Tutorial_CAD_3D_<projectname>_stl_FreeCAD
and (say)
- Tutorial_CAM_3D_stl_pyCAM
- Tutorial_CAM_3D_stl_HeeksCNC
Then we'd just need some overview pages and a way to update links at the bottom of the pages --- seem reasonable?
Naming convention for software tutorials?
-
- Posts: 8542
- Joined: Mon Apr 09, 2012 6:11 pm
- Location: Pennsylvania --- south of the Turnpike, East of US-15
- Contact:
Naming convention for software tutorials?
Shapeoko 3XL #0006 w/ Carbide Compact Router w/0.125″ and ¼″ Carbide 3D precision collets
Nomad 883 Pro #596 (bamboo)
Nomad 883 Pro #596 (bamboo)
-
- Posts: 8542
- Joined: Mon Apr 09, 2012 6:11 pm
- Location: Pennsylvania --- south of the Turnpike, East of US-15
- Contact:
Re: Naming convention for software tutorials?
And of course the first one which I write up:
http://www.shapeoko.com/wiki/index.php/ ... e/MakerCAM
Is too intricately tied together to make a nice, clean separation easy --- will have to whack at it later to separate the parts.
William
http://www.shapeoko.com/wiki/index.php/ ... e/MakerCAM
Is too intricately tied together to make a nice, clean separation easy --- will have to whack at it later to separate the parts.
William
Shapeoko 3XL #0006 w/ Carbide Compact Router w/0.125″ and ¼″ Carbide 3D precision collets
Nomad 883 Pro #596 (bamboo)
Nomad 883 Pro #596 (bamboo)