Wiki hierarchy

Have a suggestion for the website or forum? Post it here.
WillAdams
Posts: 8527
Joined: Mon Apr 09, 2012 6:11 pm
Location: Pennsylvania --- south of the Turnpike, East of US-15
Contact:

Wiki hierarchy

Post by WillAdams » Fri Feb 27, 2015 3:17 pm

Currently we have:

* about
** about | About
** FAQ | FAQ
** Overview | Overview
** http://www.shapeoko.com/forum | ShapeOko Forums
** Operating Checklist | Operating Checklist
** Vendors | Vendors
** Shapeoko_3 | Shapeoko 3 wiki page

* ShapeOko 2
** ShapeOko_2 | ShapeOko 2 Overview
** BOM | B.O.M. (Bill of Materials)
** http://docs.shapeoko.com/ | Build Instructions

* Parts
** parts|Overview
** makerslide|MakerSlide
** Belts and Pulleys|Belts and Pulleys
** electronics|Electronics
** Arduino|Microcontroller
** Stepper Motors|Stepper Motors
** Power Supply|Power Supply
** Advanced Electronics | Alternative Electronics

* Additional Build Information
** tools|Tools
** makerslide|MakerSlide
** Grbl Configuration | Grbl Configuration
** Assembly Videos | Assembly Videos
** assembly_troubleshooting | Assembly Troubleshooting

* Using Your Machine
** Workflow | Workflow
** Basic_workflow_2D | Basic 2D Workflow
** Basic_workflow_3D | Basic 3D Workflow
** Calibration_and_Squaring_the_Machine | Calibration and Squaring the Machine
** tuning | Fine Tuning
** Workholding | Workholding
** Materials | Materials (Feeds and Speeds)
** Endmills | Endmills
** Operation Troubleshooting | Troubleshooting

* Gallery
** Hello World | Hello World
** http://www.shapeoko.com/projects/projects.php | Projects
** http://www.shapeoko.com/projects/mods.php | Projects/Mods
** Projects | Projects (wiki)
** http://www.shapeoko.com/forum/viewforum.php?f=30 | Projects (forum)
** Fabrication_Techniques & Hardware | Fabrication Techniques & Hardware
** Designing for Fabrication | Designing for Fabrication

* Software
** software | Overview
** CAD | Computer Aided Design
** CAM | Computer Aided Manufacturing
** G-Code | G-Code
** Previewing_G-Code | Preview (Verify / Optimize) G-Code
** Communication_/_Control | Communication / Control
** G-Code_Interpreters | G-Code Interpreters
** Grbl | Grbl
** Interactive_G-Code_Generators | Interactive G-Code Generators
** G-Code_Utilities | G-Code Utilities
** Programmatic_G-Code_Generators | Programming
** Commercial_Software | Commercial

*Upgrades
** Upgrade_Overview | Overview
** ACME_Z-axis | ACME Z-Axis
** Belt Anchors | Belt Anchors
** Cable Management | Cable Management
** Double_Makerslide_X-Axis | Double X-Axis
** Drive_Shaft | Drive Shaft
** Dual Motor | Dual Motor
** Dust Shoe | Dust Shoe
** Emergency Stop | E-Stop
** Enclosures | Enclosures
** Laser_Cutter | Laser Cutter
** Home/Limit_Switches | Limit (Home) Switches
** 3D_Printing | 3D Printing
** Open End Plates | Open End Plates
** Painting | Painting
** Pendant | Pendant
** Scaling Up | Scaling Up
** Side Shields | Side Shields
** Spindle Options | Spindle Options and Mounts
** Workholding | Workholding

* Additional Resources
** Glossary | Glossary
** Books | Books
** Online resources | Online resources
** Other CNC projects | Other CNC projects
** The Rules of ShapeOko‎ | The Rules of ShapeOko‎

* ShapeOko 1 Build Instructions
** assembly_overview (SO1) | Assembly Overview
** electronics_overview | Electronics Overview
** Electronics (SO1)|Electronics
** parts (SO1)|Parts
** Purchasing (SO1)| Purchasing
** assembly_step_1 | 01 - V-wheel
** assembly_step_2 | 02 - Smooth Idler
** assembly_step_3 | 03 - Y-Axis Idle
** assembly_step_4 | 04 - Y-Axis Motor
** assembly_step_5 | 05 - X-Axis Motor
** assembly_step_6 | 06 - Z-Axis Plate
** assembly_step_7 | 07 - X/Z Plates
** assembly_step_8 | 08 - Gantry
** assembly_step_9 | 09 - Z-Axis
** assembly_step_10 | 10 - Spindle
** assembly_step_11 | 11 - Rear Frame
** assembly_step_12 | 12 - Main Frame
** assembly_step_13 | 13 - Mount Z-Axis
** assembly_step_14 | 14 - Electronics
** assembly_step_15 | 15 - Configure GRBL
** assembly_step_16 | 16 - Hello World!
** assembly_step_19 | 19 - More
** assembly|Assembly Videos
** assembly Step by Step|Assembly Step by Step
** Run Your First Job | Run Your First Job
** Run Your Second Job | Run Your Second Job

* wiki
** recentchanges-url|recentchanges
** Wiki Curators | Wiki Curators
** randompage-url|randompage
** helppage|help

Thoughts on re-working things?

Once we have more, the Shapeko 3 link will become an expanding section --- are there any nifty tricks for mediawiki sidebars which we're missing?
Shapeoko 3XL #0006 w/Makita RT0701 Router w/0.125″ and ¼″ Elaire precision collets
Nomad 883 Pro #596 (bamboo)

WillAdams
Posts: 8527
Joined: Mon Apr 09, 2012 6:11 pm
Location: Pennsylvania --- south of the Turnpike, East of US-15
Contact:

Re: Wiki hierarchy

Post by WillAdams » Sat Mar 14, 2015 9:40 pm

One change which I believe that we should make is to move Spindle Options and Mounts up to the Parts section

This seems suitable since the SO3 doesn't include a spindle.
Shapeoko 3XL #0006 w/Makita RT0701 Router w/0.125″ and ¼″ Elaire precision collets
Nomad 883 Pro #596 (bamboo)

WillAdams
Posts: 8527
Joined: Mon Apr 09, 2012 6:11 pm
Location: Pennsylvania --- south of the Turnpike, East of US-15
Contact:

Re: Wiki hierarchy

Post by WillAdams » Tue Mar 31, 2015 2:56 pm

Another change to make:

Move Endmills up to Parts as well (currently it's under ``Using your machine'')

Any commentary or objections to either of these changes?
Shapeoko 3XL #0006 w/Makita RT0701 Router w/0.125″ and ¼″ Elaire precision collets
Nomad 883 Pro #596 (bamboo)

rtlflatt
Posts: 178
Joined: Sun Jan 18, 2015 2:11 am
Location: Bay Area, CA

Re: Wiki hierarchy

Post by rtlflatt » Wed Apr 01, 2015 12:08 am

WillAdams wrote:Another change to make:

Move Endmills up to Parts as well (currently it's under ``Using your machine'')

Any commentary or objections to either of these changes?
that sounds like good idea. i havent needed to look for that page yet but it would have took me a min to find in using a machine
Shapeoko 3 #??? (Missing serial plate?)
Lulzbot Taz 5 (Heavily modified)

WillAdams
Posts: 8527
Joined: Mon Apr 09, 2012 6:11 pm
Location: Pennsylvania --- south of the Turnpike, East of US-15
Contact:

Re: Wiki hierarchy

Post by WillAdams » Wed Apr 01, 2015 12:29 am

Thanks. Done and done.

I’ll probably alpha sort the Upgrades section tomorrow at work (easier when I can use Services to do that) and review the ordering of each sub-section.

Put any other ideas here.
Shapeoko 3XL #0006 w/Makita RT0701 Router w/0.125″ and ¼″ Elaire precision collets
Nomad 883 Pro #596 (bamboo)

WillAdams
Posts: 8527
Joined: Mon Apr 09, 2012 6:11 pm
Location: Pennsylvania --- south of the Turnpike, East of US-15
Contact:

Re: Wiki hierarchy

Post by WillAdams » Sat Apr 25, 2015 11:11 am

One further thought would be to update / edit the main page to:

- move the history stuff to the About page
- add an overview of the various sub pages (w/ links)
- update for the SO3
Shapeoko 3XL #0006 w/Makita RT0701 Router w/0.125″ and ¼″ Elaire precision collets
Nomad 883 Pro #596 (bamboo)

WillAdams
Posts: 8527
Joined: Mon Apr 09, 2012 6:11 pm
Location: Pennsylvania --- south of the Turnpike, East of US-15
Contact:

Re: Wiki hierarchy

Post by WillAdams » Sun Apr 26, 2015 2:27 pm

Okay, I did as much on / of that as I could. Also went back to our original tradition of using an exploded view as the main image --- hoping to fiddle w/ the SVG a bit more, but managed to get something reasonably decent (really wish we could get in-place SVG files on the wiki as we did on docs.shapeoko.com)

Any further discussions, suggestions or kibbitzing would be welcome.
Shapeoko 3XL #0006 w/Makita RT0701 Router w/0.125″ and ¼″ Elaire precision collets
Nomad 883 Pro #596 (bamboo)

newtothis
Posts: 125
Joined: Wed Feb 04, 2015 6:10 pm
Location: North Suburbs of Chicago

Re: Wiki hierarchy

Post by newtothis » Mon Apr 27, 2015 5:07 pm

As a complete novice who has never done cnc milling or built a shapeoko it would be enormously helpful to me to have some sort of Quick Start guide and/or check list.
I know there are many variations of what can be done in terms of software and hardware but there has to be something that gives simple guidance on what to do next after you've assembled the machine. The "Congrats on building the SO3, Now What Guide" in a simple easy way to follow along without having to search and search. Step by step instruction would be great but probably unrealistic so a check list in order still helpful. Testing the machine? first time. Calibrating the machine first time? Code basics? The "$100" or "M something" codes people speak of.

Assume the reader knows nothing. This last bit is key since there's a lot of discussion in the forum by folks who do know a ton and there are many times that I have no idea what you're referring to - however it is fun to hunt down the knowledge. We've been spoiled by full plug and play but if I can get to plu & pla I'd be happy.
Shapeoko 3 #304

WillAdams
Posts: 8527
Joined: Mon Apr 09, 2012 6:11 pm
Location: Pennsylvania --- south of the Turnpike, East of US-15
Contact:

Re: Wiki hierarchy

Post by WillAdams » Mon Apr 27, 2015 5:21 pm

newtothis wrote:As a complete novice who has never done cnc milling or built a shapeoko it would be enormously helpful to me to have some sort of Quick Start guide and/or check list.
http://www.shapeoko.com/wiki/index.php/Overview

http://www.shapeoko.com/wiki/index.php/ ... _Checklist
I know there are many variations of what can be done in terms of software and hardware but there has to be something that gives simple guidance on what to do next after you've assembled the machine. The "Congrats on building the SO3, Now What Guide" in a simple easy way to follow along without having to search and search. Step by step instruction would be great but probably unrealistic so a check list in order still helpful. Testing the machine? first time. Calibrating the machine first time? Code basics? The "$100" or "M something" codes people speak of.
http://www.shapeoko.com/wiki/index.php/ ... he_Machine

http://www.shapeoko.com/wiki/index.php/Workflow

http://www.shapeoko.com/wiki/index.php/G-Code
Assume the reader knows nothing. This last bit is key since there's a lot of discussion in the forum by folks who do know a ton and there are many times that I have no idea what you're referring to - however it is fun to hunt down the knowledge. We've been spoiled by full plug and play but if I can get to plu & pla I'd be happy.
http://www.shapeoko.com/wiki/index.php/Glossary
Shapeoko 3XL #0006 w/Makita RT0701 Router w/0.125″ and ¼″ Elaire precision collets
Nomad 883 Pro #596 (bamboo)

newtothis
Posts: 125
Joined: Wed Feb 04, 2015 6:10 pm
Location: North Suburbs of Chicago

Re: Wiki hierarchy

Post by newtothis » Tue Apr 28, 2015 6:54 pm

Thanks. I signed up for GRZ Software's Free Crash course in CNC and its very helpful. Come's from a total novice POV. Just what I needed. While GRZ is a separate thing from Carbide3D/Shapeoko, the same guy is part of both companies. Extremely helpful and responsive.
Shapeoko 3 #304

Post Reply