Wiki hierarchy

Have a suggestion for the website or forum? Post it here.
WillAdams
Posts: 8502
Joined: Mon Apr 09, 2012 6:11 pm
Location: Pennsylvania --- south of the Turnpike, East of US-15
Contact:

Re: Wiki hierarchy

Post by WillAdams » Sat Jun 13, 2015 3:06 pm

Two further changes to consider:

Move ** Calibration_and_Squaring_the_Machine | Calibration and Squaring the Machine up to Additional Build Information?

Create a new section specifically on spindles / tools / tooling, something like:

* Overview --- this would be the test from the current Upgrades Overview page
** Spindles --- current page from Parts
** Endmills --- current page from Parts
** Laser Cutter --- current page from Upgrades
** 3D printing --- current page from Upgrades
** Engraving --- new page
** Drag Knives --- new page --- we really need to work up a suitable design for one which can be easily milled on a Shapeoko

Unless there are objections, I’ll do these the next time I get a chance.
Shapeoko 3XL #0006 w/Makita RT0701 Router w/0.125″ and ¼″ Elaire precision collets
Nomad 883 Pro #596 (bamboo)

WillAdams
Posts: 8502
Joined: Mon Apr 09, 2012 6:11 pm
Location: Pennsylvania --- south of the Turnpike, East of US-15
Contact:

Re: Wiki hierarchy

Post by WillAdams » Wed Jul 08, 2015 3:24 pm

Okay, I did the spindle thing --- I think it's a big improvement.

Still need to make pages for engraving and drag knives though.....
Shapeoko 3XL #0006 w/Makita RT0701 Router w/0.125″ and ¼″ Elaire precision collets
Nomad 883 Pro #596 (bamboo)

Post Reply