Quiet Cut Vs Dewalt/Mikita router What do I buy?

Re: Quiet Cut Vs Dewalt/Mikita router What do I buy?

Postby cvoinescu » Thu Nov 06, 2014 6:41 pm

Schruminator wrote:Also, I just learned that "axes" is the plural of "axis". Something new every day....

And they sound the same, as far as I can tell.
Proud owner of ShapeOko #709, eShapeOko #0, and of store.amberspyglass.co.uk
cvoinescu
 
Posts: 4442
Joined: Thu Jul 19, 2012 6:50 pm
Location: Camberley, UK

Re: Quiet Cut Vs Dewalt/Mikita router What do I buy?

Postby dave_the_nerd » Fri Nov 07, 2014 1:26 am

cvoinescu wrote:
Schruminator wrote:Also, I just learned that "axes" is the plural of "axis". Something new every day....

And they sound the same, as far as I can tell.

axe-eez vs. axe-iss?
Shapeoko 2 # 6651: 500x1000mm, Acme screw and belt drive Z-axis, DW660 w/ IC mount, Arduino/grblShield w/ gCode 0.9g and 3D-printed electronics enclosure.
dave_the_nerd
 
Posts: 143
Joined: Thu Oct 09, 2014 3:23 pm

Re: Quiet Cut Vs Dewalt/Mikita router What do I buy?

Postby CrazyBillybob » Mon Dec 01, 2014 3:38 pm

So after reading all you all's comments and looking around I was able to pick up a Dewalt DWP611 for a good price over the weekend. (Linky to the DWP611)
I also ordered the precise bits ER16 1/4, 1/8 collets and nut that fit the DWP611 once everything comes in and I get some mounts made up. I'll post up some photos and let you guys know what I think about it.

Thanks again for all the feed back and help!

CBB
CrazyBillybob
 
Posts: 195
Joined: Mon Dec 16, 2013 2:09 pm
Location: Ohio

Re: Quiet Cut Vs Dewalt/Mikita router What do I buy?

Postby balazar » Wed Nov 11, 2015 7:20 pm

Has anyone actually used a 600w or 800w spindle? How does the power and weight compair to a dw611 or similar router? I'm looking at a dw611 with superPID vs a spindle with vfd for control with mach3. Does anyone have experience with the spindles?
SO1# 1161
balazar
 
Posts: 12
Joined: Thu Jan 22, 2015 3:42 am

Re: Quiet Cut Vs Dewalt/Mikita router What do I buy?

Postby WillAdams » Wed Nov 11, 2015 8:54 pm

What's been shared thus far is on the wiki: http://www.shapeoko.com/wiki/index.php/Spindle_Options
Shapeoko 3XL #0006 w/Makita RT0701 Router w/0.125″ and ¼″ Elaire precision collets
Nomad 883 Pro #596 (bamboo)
WillAdams
 
Posts: 8462
Joined: Mon Apr 09, 2012 6:11 pm
Location: Pennsylvania --- south of the Turnpike, East of US-15

Previous

Return to Mini Spindles - Purchased

Who is online

Users browsing this forum: No registered users and 1 guest