1/4" Air Die Grinder? [Solved]

Post Reply
MLange
Posts: 70
Joined: Tue Apr 10, 2012 8:23 am
Location: Ottawa, ON, Canada

1/4" Air Die Grinder? [Solved]

Post by MLange » Fri Apr 27, 2012 11:47 pm

Would one of these make for a good spindle? http://www.princessauto.com/pal/product ... ie-Grinder (or the house-brand version: http://www.princessauto.com/pal/product ... ie-Grinder )
Last edited by MLange on Mon Apr 30, 2012 10:30 pm, edited 1 time in total.
Shapeoko #280 (Inventables Batch #1)

Enraged
Posts: 230
Joined: Mon Apr 09, 2012 8:29 pm

1/4" Air Die Grinder

Post by Enraged » Sat Apr 28, 2012 12:00 am

No, I've got one. It uses a lot of air and makes more noise than a dremel, and not very much torque at anything but full throttle. Great for shaping metal, but not great for a CNC router

MLange
Posts: 70
Joined: Tue Apr 10, 2012 8:23 am
Location: Ottawa, ON, Canada

Re: 1/4" Air Die Grinder

Post by MLange » Sat Apr 28, 2012 4:03 am

That solves that :D
Shapeoko #280 (Inventables Batch #1)

Post Reply