Your Settings? Beaglebone + LinuxCNC + TB6560 single driver

Discussion of linuxCNC (formerly knows as EMC2)
Post Reply
med
Posts: 33
Joined: Tue Nov 12, 2013 10:21 am

Your Settings? Beaglebone + LinuxCNC + TB6560 single driver

Post by med » Wed Nov 26, 2014 11:30 pm

Hello,

i want to know what are your settings or which one would you recommend for my setup, because at the moment the machine loses steps:
Beaglebone + LinuxCNC (machinekit) + TB 6560 single driver

my setup is:

linuxCNC.ini
DIRSETUP = 20000
DIRHOLD = 20000
STEPLEN = 5000
STEPSPACE = 5000

Setup stepper driver (switches)
2.6 A (1,1,0,0)
50 % Stop current (0)
1/2 steps (1,0)
50 % decay settings (0,1)

Hope to learn from your settings

Post Reply