Setting for PCB perimeter cut

Post Reply
scott216
Posts: 226
Joined: Thu Oct 10, 2013 12:35 pm
Location: New Jersey

Setting for PCB perimeter cut

Post by scott216 » Wed Apr 09, 2014 1:01 am

What's a good bit and settings for cutting out prototype PCB board like this: http://www.radioshack.com/product/index ... Id=2102843#
I want to do a perimeter cut to a specific shape. I have a stock Shapeoko 2.
Shapeoko 2 with DW660
grbl v0.9g
PCB Toolchain: Cadsoft Eagle > pcb-gcode > Chilipeppr or GRBL Panel
Other Toolchain: Fusion 360 > Chilipeppr or GRBL Panel
My Build Log
Location: New Jersey

Post Reply