Page 1 of 1

Video: How to mill a PCB with Chilipeppr and GRBL

Posted: Sun Sep 27, 2015 10:35 am
by xpix
Hey Friends, i'm proud to present my small VideoSessions (2) to describe the complete process to mill a PCB with chilipeppr. I hope you like it? Comments are welcome!

This Playlist describe to process (Eagle + Chilipeppr + Prepare CNC + Mill on CNC) on my CNC (eShapeoko) to made a PCB with Chilipeppr and GRBL.

https://www.youtube.com/playlist?list=P ... 8ezk88KzaX





Complete Playlist about the XDisPlace Project at Chilipeppr
https://www.youtube.com/watch?v=TY02ZsG ... z8d09ipsBq

Re: Video: How to mill a PCB with Chilipeppr and GRBL

Posted: Sun Sep 27, 2015 2:02 pm
by WillAdams
Playlists don’t seem to work w/ the YouTube embed feature here, so I took the liberty of editing your post.

Thank you for making, sharing and posting this. Adding it to the wiki as well.

Re: Video: How to mill a PCB with Chilipeppr and GRBL

Posted: Sun Sep 27, 2015 10:47 pm
by AnonymousPerson
WillAdams wrote:Playlists don’t seem to work w/ the YouTube embed feature here...
Any idea if it's due to an outdated Youtube plugin/whatever for phpBB? (I don't have admin experience with phpBB, so not sure how phpBB does things)

As a data point, I have to View Source on any page with the Youtube plugin, find the URL for it, then cut-n-paste it into a Youtube native format (youtube.com/watch?v=xxxxxxxx) for it to work. Seems to be due to not having Flash Player installed, and phpBB not falling back to HTML5 video instead. :?

Re: Video: How to mill a PCB with Chilipeppr and GRBL

Posted: Mon Sep 28, 2015 7:57 am
by xpix
WillAdams wrote:Playlists don’t seem to work w/ the YouTube embed feature here, so I took the liberty of editing your post.

Thank you for making, sharing and posting this. Adding it to the wiki as well.
Thank you will, sounds good! :)

Re: Video: How to mill a PCB with Chilipeppr and GRBL

Posted: Mon Dec 21, 2015 10:24 am
by PollyMotion
Thank you so much for sharing this!
Very interesting.
Personally, I've just started "CNC'ing". This tutorial was of great help. I'll definitely try out this auto leveling feature.
Your PCB came out great :)

-- PollyMotion

Re: Video: How to mill a PCB with Chilipeppr and GRBL

Posted: Mon Dec 21, 2015 11:30 am
by xpix
PollyMotion wrote:Thank you so much for sharing this!
Very interesting.
Personally, I've just started "CNC'ing". This tutorial was of great help. I'll definitely try out this auto leveling feature.
Your PCB came out great :)

-- PollyMotion
Yes this are the start for my XDisplace project. A complete process to mill, dispense and pick and place machine. Check this playlist:

https://www.youtube.com/watch?v=TY02ZsG ... z8d09ipsBq