Yet Another Shapeoko PnP
-
- Posts: 7
- Joined: Fri Feb 13, 2015 3:46 pm
Yet Another Shapeoko PnP
Follow along as I tell the tale of converting my Shapeoko to a pick-and-place machine:
http://blog.protovoltaics.com/diy-pick-and-place/
http://blog.protovoltaics.com/diy-pick-and-place/
-
- Posts: 14
- Joined: Sun Jan 18, 2015 4:30 pm
- Location: USA
Re: Yet Another Shapeoko PnP
Nice. Are you following the development of Fire Pick Delta?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
--
Shapeoko 2 #7976; acme z-axis; grbl 0.9g; UGS 1.0.8
Workflow 1: Eagle -> Gerbv -> Inkscape -> MC -> OpenSCAM -> grbl
Workflow 2: Inkscape -> MC -> OpenSCAM -> grbl
Shapeoko 2 #7976; acme z-axis; grbl 0.9g; UGS 1.0.8
Workflow 1: Eagle -> Gerbv -> Inkscape -> MC -> OpenSCAM -> grbl
Workflow 2: Inkscape -> MC -> OpenSCAM -> grbl
-
- Posts: 7
- Joined: Fri Feb 13, 2015 3:46 pm
Re: Yet Another Shapeoko PnP
Oh, yes. Very cool stuff.
We're focusing on the feeders at this point. A lot of folks will probably just cut off some of the tape and expose the parts manually.
We're focusing on the feeders at this point. A lot of folks will probably just cut off some of the tape and expose the parts manually.
Re: Yet Another Shapeoko PnP
Cool! You are aware of the software I offer on my site, right? (http://www.liteplacer.com)
-
- Posts: 7
- Joined: Fri Feb 13, 2015 3:46 pm
Re: Yet Another Shapeoko PnP
I was amazed to find your liteplacer project. Amazing work... just wow! I've been looking at all the great stuff on you site, but I haven't looked at your code yet.
I just got the feeder firmware working today. I'll try to put a video up tomorrow. That's what I've been working on this week.
You wouldn't mind then if we add a module to your software to control our feeders? I saw your intro YouTube video and the software looks very good.
I just got the feeder firmware working today. I'll try to put a video up tomorrow. That's what I've been working on this week.
You wouldn't mind then if we add a module to your software to control our feeders? I saw your intro YouTube video and the software looks very good.
-
- Posts: 7
- Joined: Fri Feb 13, 2015 3:46 pm
Re: Yet Another Shapeoko PnP
A video update on the feeders: http://youtu.be/uNBV_dabrDA
-
- Posts: 7
- Joined: Fri Feb 13, 2015 3:46 pm
Re: Yet Another Shapeoko PnP
Been a while since we have updated here. We now have the machine up and running! Also, they are now available for purchase through our KickStarter. To keep up with all the latest updates view our Hackaday page!
https://hackaday.io/project/5200-pick-and-place-machine
https://www.kickstarter.com/projects/pr ... tovoltaics
https://hackaday.io/project/5200-pick-and-place-machine
https://www.kickstarter.com/projects/pr ... tovoltaics
Re: Yet Another Shapeoko PnP
Fascinating!! Well engineered and just brilliant!
No longer have a Shapeoko, but use a machine of my own design...
https://www.youtube.com/watch?v=gFY4gC9TqD0
http://deltaguitarworks.tumblr.com
https://www.youtube.com/watch?v=gFY4gC9TqD0
http://deltaguitarworks.tumblr.com
-
- Posts: 7
- Joined: Fri Feb 13, 2015 3:46 pm
Re: Yet Another Shapeoko PnP
Thank you for the kind words! It has been quite the project. We are still working on making it better and better. Seems like every time we change one thing we end up having to change everything to get it to work.bharbour wrote:Fascinating!! Well engineered and just brilliant!