Fishing rod

Share your Shapeoko created projects!
Post Reply
Mudshark
Posts: 61
Joined: Fri May 11, 2012 2:14 pm
Location: East Coast Iowa

Fishing rod

Post by Mudshark » Thu Dec 12, 2013 3:27 pm

I used my shapeoko to laser cut for foam inlays, to shape the foam handles and to laser engrave the rod itself.
DSCF3019.jpg
Rod work with shapeoko
DSCF3019.jpg (69.17 KiB) Viewed 1248 times
For the inlays, I cut the EVA foam at about 1/2 watt. For shaping the foam I used a rotary attachment I had built using a stepper motor connected to one of the axis. 100 mm, 1/8" 2 flute bit, no worries on pass depth. The foam is final shaped using a drill press and sandpaper.
For the engraving, I used the rotary attachment and about 1/2 watt on the laser.
All the modeling was done with Bobcad V21 but the gcode has to be cleaned up. Snapfracturepop has a gcode parser for laser use that I have not tried.

Here is a previous picture of my rotary attachment.
DSCF0647.jpg
Rotary attachment
DSCF0647.jpg (91.82 KiB) Viewed 1248 times
Mudshark
Serial #0054, 2 Watt laser, dual X motors, double Y, ACME Z Axis, G540, Mach 3, rotating axis, needle cutter, Proxxon, 750mm x 375mm, laser cross hairs, auto zero, GT2
Ordbot #201, E3d hot end, bourdon tube feeder.

WillAdams
Posts: 8489
Joined: Mon Apr 09, 2012 6:11 pm
Location: Pennsylvania --- south of the Turnpike, East of US-15
Contact:

Re: Fishing rod

Post by WillAdams » Thu Dec 12, 2013 3:33 pm

Very, very cool!

Please post it to the Projects wiki page! http://www.shapeoko.com/wiki/index.php/Projects (I added a link, but it'd be great to have it in the wiki / gallery).
Shapeoko 3XL #0006 w/Makita RT0701 Router w/0.125″ and ¼″ Elaire precision collets
Nomad 883 Pro #596 (bamboo)

ThatDamnGuy
Posts: 27
Joined: Mon Apr 01, 2013 1:43 pm
Location: Akron Ohio
Contact:

Re: Fishing rod

Post by ThatDamnGuy » Sat Dec 21, 2013 4:25 pm

That is really SLICK! ... great job!

Post Reply