First project

Share your Shapeoko created projects!
Post Reply
Casanova
Posts: 7
Joined: Wed Nov 19, 2014 2:38 am

First project

Post by Casanova » Sat Jul 25, 2015 11:05 pm

image.jpg
image.jpg (104.69 KiB) Viewed 1818 times
Hi, I just get my Shapeoko2 and here is my first project. It is the first time I use a CNC machine and decided to share it in the forum.

Thanks
Last edited by Casanova on Sun Jul 26, 2015 3:10 pm, edited 1 time in total.
Shapeoko 2, extended x=500mm, y=1000mm. Arduino/grbl, dw660.

Ing Chao
Posts: 72
Joined: Fri Dec 28, 2012 7:10 pm

Re: First project

Post by Ing Chao » Sun Jul 26, 2015 12:01 am

Well, how's about some pics?
:D
'Oko #1153- D Extended Y axis-1000mm. Dual X axis makerslide-900mm Nema 23 X and Y axis motors. Arduino Uno and Grbl shield controller running on 24v.

Casanova
Posts: 7
Joined: Wed Nov 19, 2014 2:38 am

Re: First project

Post by Casanova » Mon Jul 27, 2015 8:15 pm

Sorry, I posted it now. The first time it was too big.
Shapeoko 2, extended x=500mm, y=1000mm. Arduino/grbl, dw660.

aam
Posts: 38
Joined: Sat Aug 30, 2014 6:17 pm

Re: First project

Post by aam » Mon Jul 27, 2015 8:36 pm

And now it's upside down...

Brian Stone
Posts: 295
Joined: Tue Oct 21, 2014 1:52 am
Location: Seattle, WA

Re: First project

Post by Brian Stone » Mon Jul 27, 2015 10:19 pm

It's upside down, but it looks great. What kind of wood did you use, and what finishing techniques (stain, varnish, etc.)?
Shapeoko 2 #7353
1500x1000mm Shapeoko/X-Carve Hybrid, Nema-23's, Belt-Driven Z-Axis /w ACME Screw, Dewalt 611, Soundproof Enclosure
[Fusion 360 | Illustrator] -> Universal G-Code Sender

Casanova
Posts: 7
Joined: Wed Nov 19, 2014 2:38 am

Re: First project

Post by Casanova » Mon Jul 27, 2015 11:00 pm

It is mahogany, and just applied a clear varnish
Shapeoko 2, extended x=500mm, y=1000mm. Arduino/grbl, dw660.

tegneejnar
Posts: 12
Joined: Tue Apr 22, 2014 6:45 pm

Re: First project

Post by tegneejnar » Sat Aug 08, 2015 8:10 am

Nice job for a first project. We would like to see more... :D

bharbour
Posts: 413
Joined: Wed Aug 06, 2014 3:40 pm
Location: Mobile, AL
Contact:

Re: First project

Post by bharbour » Sun Aug 09, 2015 3:29 pm

Nice...
No longer have a Shapeoko, but use a machine of my own design...
https://www.youtube.com/watch?v=gFY4gC9TqD0
http://deltaguitarworks.tumblr.com

Post Reply