2-sided milling in Rhino - THE EASY WAY

Share your Shapeoko created projects!
Post Reply
xfredericox
Posts: 292
Joined: Mon May 04, 2015 10:46 am

2-sided milling in Rhino - THE EASY WAY

Post by xfredericox » Fri Dec 30, 2016 1:43 am

I don't know if many of you use Rhino, but if you do ( and even if you don't :-) ), you might find this helpful:
http://www.manmademayhem.com/?p=2397



It's my first shot at making a somewhat decent video, so let me know what you think.
Visit my blog for updates on my current SO2/lasercutting/... projects.
http://www.manmademayhem.com

lowrizzle
Posts: 8
Joined: Wed Mar 09, 2016 1:22 am

Re: 2-sided milling in Rhino - THE EASY WAY

Post by lowrizzle » Tue Jan 03, 2017 7:41 am

Your moving pictures are worth a thousand words - I skipped to where you reset the puzzle piece. Now I need to wrap my head around how to rejigger this for my workflow, but it's a very interesting approach to the problem.

xfredericox
Posts: 292
Joined: Mon May 04, 2015 10:46 am

Re: 2-sided milling in Rhino - THE EASY WAY

Post by xfredericox » Wed Jan 04, 2017 2:04 pm

thanks for the feedback.

I tried keeping it as short as possible, but time flies when you're recording :-)
Visit my blog for updates on my current SO2/lasercutting/... projects.
http://www.manmademayhem.com

Post Reply