Mach3 5.5.2.1

Discussion of Mach3 CNC control software
Post Reply
network00
Posts: 1
Joined: Fri Apr 11, 2014 11:55 am

Mach3 5.5.2.1

Post by network00 » Fri Apr 25, 2014 3:40 pm

In 5.5.2.1 of the Mach3 manual, on page 5-20 top of the page it says "Press and hold the curser Up key on your keyboard" to test the machine axis.
First do they mean the up arrow key?
Second nothing happens when I do so.

MickeLa84
Posts: 1
Joined: Sat Oct 05, 2013 7:08 pm

Re: Mach3 5.5.2.1

Post by MickeLa84 » Fri Apr 25, 2014 4:14 pm

Yes, in Mach3 you use the arrow and pageup/pagedown keys to jog the machine (Up=Y+ , Down=Y- , Right=X+ , Left=X- , PageUp=Z+ , PageDown=Z-). Make sure that the red reset button in the bottom left of the screen isn't flashing.

Skickat från min LG-D802 via Tapatalk

Post Reply