Hello,
Brand new to this hobby that is desktop cnc. My mentor mentioned that chances are someone somewhere has already done the calibration to get the settings for mach 2 or mach 3 with the configuration. I received a Xylotex xs3525/8s-3 3 axis stepper board from him. I would like to use the standard NEMA 17's that came with my shapeoko 2. Does anyone have a similar setup that they could share screenshots or values for mach2/mach3?
Thank you.
Xylotex settings with Mach 3
-
edwardrford
- Posts: 1250
- Joined: Mon Apr 09, 2012 5:40 pm
- Location: Dixon, IL
- Contact:
Re: Xylotex settings with Mach 3
The xylotex board has a unique pinout compared to the TB6560 and other DB25 boards.
Xylotex data sheet: http://www.xylotex.com/XS35V.pdf
Xylotex setup document: http://www.xylotex.com/BoardSetupA.pdf
Reading through the xylotex setup document, there is a link to a pre-configured mach3 file here: http://groups.yahoo.com/group/Xylotex/files/
That should do it.
-Edward
Xylotex data sheet: http://www.xylotex.com/XS35V.pdf
Xylotex setup document: http://www.xylotex.com/BoardSetupA.pdf
Reading through the xylotex setup document, there is a link to a pre-configured mach3 file here: http://groups.yahoo.com/group/Xylotex/files/
That should do it.
-Edward
Shapeoko 1 #0 - a couple of upgrades.
Shapeoko 2 #0 - a couple of upgrades.
Shapeoko 3 #2 - Stock
Shapeoko 2 #0 - a couple of upgrades.
Shapeoko 3 #2 - Stock