Xylotex settings with Mach 3

Discussion of Mach3 CNC control software
Post Reply
JoelV
Posts: 1
Joined: Sun Jul 13, 2014 11:03 pm

Xylotex settings with Mach 3

Post by JoelV » Mon Jul 14, 2014 2:49 am

Hello,

Brand new to this hobby that is desktop cnc. My mentor mentioned that chances are someone somewhere has already done the calibration to get the settings for mach 2 or mach 3 with the configuration. I received a Xylotex xs3525/8s-3 3 axis stepper board from him. I would like to use the standard NEMA 17's that came with my shapeoko 2. Does anyone have a similar setup that they could share screenshots or values for mach2/mach3?

Thank you.

edwardrford
Posts: 1250
Joined: Mon Apr 09, 2012 5:40 pm
Location: Dixon, IL
Contact:

Re: Xylotex settings with Mach 3

Post by edwardrford » Tue Jul 15, 2014 1:19 pm

The xylotex board has a unique pinout compared to the TB6560 and other DB25 boards.

Xylotex data sheet: http://www.xylotex.com/XS35V.pdf
Xylotex setup document: http://www.xylotex.com/BoardSetupA.pdf

Reading through the xylotex setup document, there is a link to a pre-configured mach3 file here: http://groups.yahoo.com/group/Xylotex/files/

That should do it.

-Edward
Shapeoko 1 #0 - a couple of upgrades.
Shapeoko 2 #0 - a couple of upgrades.
Shapeoko 3 #2 - Stock

Post Reply