Considering using Mach3 with ShapeOko

Discussion of Mach3 CNC control software
Posts: 10
Joined: Tue Feb 03, 2015 7:34 pm

Re: Considering using Mach3 with ShapeOko

Post by ykornx » Thu Feb 05, 2015 12:38 pm

WillAdams wrote:Please see:
It is able to move using [[Stepper Motors]] which are controlled by [[Stepper Drivers]] attached to a controlling system. In the past, this had to be a full-fledged computer system which ran a G-Code interpreter, attached via specialized hardware directly controlling the machine (e.g., Mach3 or LinuxCNC), instead a Shapeoko uses a [[Arduino|Microcontroller Microcontroller (an Arduino)]]) running [[Grbl] (a G-Code interpreter) attached to the machine via a [[gShield] and controlled by a computer system running a [[Communication / Control]] program such as [[Universal Gcode Sender]].
Thanks man, now i got the things cleared. Very helpful :)

Posts: 8628
Joined: Mon Apr 09, 2012 6:11 pm
Location: Pennsylvania --- south of the Turnpike, East of US-15

Re: Considering using Mach3 with ShapeOko

Post by WillAdams » Thu Feb 05, 2015 1:03 pm

My pleasure.

Please let me know if there's anything else which you find confusing or hard to pick up on or which you can't find --- that's how the wiki improves.

I've re-read and re-edited it a couple of times. Hopefully it's clear enough now, but still concise enough to serve as a reasonable overview.
Shapeoko 3XL #0006 w/ Carbide Compact Router w/0.125″ and ¼″ Carbide 3D precision collets

Post Reply