Anyone not following Edward on Twitter?

General Discussion about anything!
Post Reply
WillAdams
Posts: 8604
Joined: Mon Apr 09, 2012 6:11 pm
Location: Pennsylvania --- south of the Turnpike, East of US-15
Contact:

Anyone not following Edward on Twitter?

Post by WillAdams » Fri Mar 06, 2015 6:14 pm

There's a nifty teaser video there:

https://twitter.com/shapeoko/status/573600515411435520
Shapeoko 3XL #0006 w/ Carbide Compact Router w/0.125″ and ¼″ Carbide 3D precision collets

Brian Stone
Posts: 295
Joined: Tue Oct 21, 2014 1:52 am
Location: Seattle, WA

Re: Anyone not following Edward on Twitter?

Post by Brian Stone » Fri Mar 06, 2015 6:22 pm

Nice. The anticipation is building.
Shapeoko 2 #7353
1500x1000mm Shapeoko/X-Carve Hybrid, Nema-23's, Belt-Driven Z-Axis /w ACME Screw, Dewalt 611, Soundproof Enclosure
[Fusion 360 | Illustrator] -> Universal G-Code Sender

TomO
Posts: 171
Joined: Mon Dec 29, 2014 1:19 am

Re: Anyone not following Edward on Twitter?

Post by TomO » Fri Mar 06, 2015 7:51 pm

Can someone post a link to the video? Don't have a Twitter account and it only shows up as a photo. Thanks


Sent from my iPhone using Tapatalk

fl0yd
Posts: 87
Joined: Wed Mar 12, 2014 5:37 pm
Location: St. Louis, MO

Re: Anyone not following Edward on Twitter?

Post by fl0yd » Fri Mar 06, 2015 7:57 pm

TomO wrote:Can someone post a link to the video? Don't have a Twitter account and it only shows up as a photo. Thanks


Sent from my iPhone using Tapatalk
LINK

Fl0yd

CastIrony
Posts: 650
Joined: Mon Jul 21, 2014 10:21 pm
Location: Portland, OR

Re: Anyone not following Edward on Twitter?

Post by CastIrony » Fri Mar 06, 2015 11:44 pm

We're all gonna be engraving ours, right? :D
Shapeoko 3 #192 - Complete! Needs limit switches.

twforeman
Posts: 1351
Joined: Tue Jan 29, 2013 4:51 pm
Location: Minneapolis, MN
Contact:

Re: Anyone not following Edward on Twitter?

Post by twforeman » Sat Mar 07, 2015 5:01 pm

Cute.
Ender 3 3D Printer
ShapeOko v3 serial #0004 - upgrade thread
All of my ShapeOko related blog posts

Gadgetman!
Posts: 1061
Joined: Sun Aug 25, 2013 12:44 pm
Location: Norway
Contact:

Re: Anyone not following Edward on Twitter?

Post by Gadgetman! » Sat Mar 07, 2015 6:04 pm

The badge should have been made of 1/16" aluminium, and blank.
Then the first job would be to engrave the serial number...
Weird guy...
Shapeoko 2014F: 1000mm X/Y, 300W Quiet Cut spindle, Arduino Uno/G-shield and GRBL 0.9i
15x30 drag chains, custom spindle mount, 9mm belts, 8mm endplates, 6mm motor plates.

edwardrford
Posts: 1250
Joined: Mon Apr 09, 2012 5:40 pm
Location: Dixon, IL
Contact:

Re: Anyone not following Edward on Twitter?

Post by edwardrford » Sat Mar 07, 2015 7:40 pm

Gadgetman! wrote:The badge should have been made of 1/16" aluminium, and blank.
Then the first job would be to engrave the serial number...
The badge is made from aluminum, not sure what gauge, it might be 0.060". Engraving on it would be possible. I thought (after the fact) that I should have taped the the sharpie to the spindle mount and at least used the machine to write my name... would have saved me the embarrassment of sharing my terrible handwriting!

-Edward
Shapeoko 1 #0 - a couple of upgrades.
Shapeoko 2 #0 - a couple of upgrades.
Shapeoko 3 #2 - Stock

WillAdams
Posts: 8604
Joined: Mon Apr 09, 2012 6:11 pm
Location: Pennsylvania --- south of the Turnpike, East of US-15
Contact:

Re: Anyone not following Edward on Twitter?

Post by WillAdams » Sat Mar 07, 2015 7:54 pm

Edward, I believe l have a spare copy of Tom Gourdie's Handwriting Made Easy: A Simple Modern Approach --- let me know if you'd like it.

Of course there's always the source:

http://www.operina.com/
Shapeoko 3XL #0006 w/ Carbide Compact Router w/0.125″ and ¼″ Carbide 3D precision collets

LTEPM
Posts: 271
Joined: Tue Jan 06, 2015 4:34 am
Location: no where near the end of the rainbow

Re: Anyone not following Edward on Twitter?

Post by LTEPM » Sat Mar 07, 2015 8:31 pm

edwardrford wrote: The badge is made from aluminum, not sure what gauge, it might be 0.060". Engraving on it would be possible. I thought (after the fact) that I should have taped the the sharpie to the spindle mount and at least used the machine to write my name... would have saved me the embarrassment of sharing my terrible handwriting!

-Edward
You can at least write your name legibly. I think I will leave my badge blank or wait to engrave it when I'm more proficient in CNC to save embarrassment.

Post Reply