Now this is a simple Idea.
http://speedsociety.com/diy-go-kart-powered-drill/
Drill Powered Go Cart
Drill Powered Go Cart
Shapeoko 2 #6971
Upgrades
Makita 0701, Nema23s, ACME Z Axis, Nema 23 Belt drive
Expanded to 1000 x 1800
Electronics upgrade C-10 BOB, SainSmart ST-M5045 drivers, Mach3
Damin69's Build Log
Upgrades
Makita 0701, Nema23s, ACME Z Axis, Nema 23 Belt drive
Expanded to 1000 x 1800
Electronics upgrade C-10 BOB, SainSmart ST-M5045 drivers, Mach3
Damin69's Build Log
Re: Drill Powered Go Cart
Very cool idea - thanks for sharing. Kids will really enjoy this.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: Drill Powered Go Cart
I can hear the conversation now... "we understand that you were trying to provide your child with entertainment on a budget, however, Child Protective Services still considers 3 sticks of wood screwed together, slack rope for steering, and a contraption with no brake system definitely falls within our 'child endangerment' category' of offenses"... lol
Shapeoko 2, Full Kit #7071, Makita RT0701C Router, 1000 x 1000 upgrade, Acme Z Axis w/Nema 17 Belt Drive
-
- Posts: 1061
- Joined: Sun Aug 25, 2013 12:44 pm
- Location: Norway
- Contact:
Re: Drill Powered Go Cart
I wonder how long tha drill will last....
They're not really designed for continuous full-speed use over longer periods.
They're not really designed for continuous full-speed use over longer periods.
Weird guy...
Shapeoko 2014F: 1000mm X/Y, 300W Quiet Cut spindle, Arduino Uno/G-shield and GRBL 0.9i
15x30 drag chains, custom spindle mount, 9mm belts, 8mm endplates, 6mm motor plates.
Shapeoko 2014F: 1000mm X/Y, 300W Quiet Cut spindle, Arduino Uno/G-shield and GRBL 0.9i
15x30 drag chains, custom spindle mount, 9mm belts, 8mm endplates, 6mm motor plates.
Re: Drill Powered Go Cart
Nice idea.
Re: Drill Powered Go Cart
Dat frisbee!!!






'Oko #1153- D Extended Y axis-1000mm. Dual X axis makerslide-900mm Nema 23 X and Y axis motors. Arduino Uno and Grbl shield controller running on 24v.