depth of cut is not correct

an open source, web based CAM package that works!
Posts: 4442
Joined: Thu Jul 19, 2012 6:50 pm
Location: Camberley, UK

Re: depth of cut is not correct

Post by cvoinescu » Fri Dec 25, 2015 2:20 pm

KRG wrote:Is it does lift .5 above the stock and zero is right on the surface.
Then there's no reason for it to go deeper than 0.05, given your G-code...
Proud owner of ShapeOko #709, eShapeOko #0, and of

Post Reply