Page 1 of 2

PreciseBits Collets

Posted: Mon Sep 28, 2015 6:29 pm
by alhaddar
Hello
I have Bosch GKF 600 and I want her router extension Wade help you get it mounted on PreciseBits Collets

http://www.precisebits.com/products/equ ... !!KIT!!!PG!!!


thanks

Re: PreciseBits Collets

Posted: Mon Sep 28, 2015 6:32 pm
by twforeman
Is there a question here?

If you are asking if the PreciseBits collets are available for a Bosch GFK 600 router you might be better off sending them an email directly, or calling them.

http://www.precisebits.com/contact_info.htm

Re: PreciseBits Collets

Posted: Mon Sep 28, 2015 6:50 pm
by alhaddar
Emile has sent in this regard, but I did not get back from them with regret

Re: PreciseBits Collets

Posted: Mon Sep 28, 2015 7:03 pm
by AnonymousPerson
twforeman wrote:Is there a question here?
At a guess, alhaddar might not be an english speaker, and might be using Google Translate (or similar).

I sometimes use the same approach when emailing non-english mailing lists. (not often, but sometimes needed for specific things ;>)

Re: PreciseBits Collets

Posted: Mon Sep 28, 2015 7:08 pm
by alhaddar
I actually use the site through Google translator

Re: PreciseBits Collets

Posted: Mon Sep 28, 2015 7:09 pm
by WillAdams
The Precise Bits folks should respond to the e-mail.

They do have an account here (TDA if memory serves), but e-mail or a contact form on their site is probably better.

Please let us know if you have any specific questions which aren't addressed by their products and its documentation and their customer service. A number of people use their collets w/ the Dewalt DWP611 and are quite pleased w/ them.

Re: PreciseBits Collets

Posted: Mon Sep 28, 2015 9:45 pm
by TDA
Unfortunately we no longer support the Bosch GKF 600. It's based on the Colt and uses it's collets. We had to drop support for them due to changes in the taper of the router. There's more info on our site under the Bosch Colt Case Study link. I would link it here but I try not to on forums.

Re: PreciseBits Collets

Posted: Mon Sep 28, 2015 9:56 pm
by WillAdams
Links from reputable companies who generously share their time and knowledge on the forums are always welcome.

This one?

http://www.precisebits.com/lab_reports/ ... lt_TIR.htm

Re: PreciseBits Collets

Posted: Mon Sep 28, 2015 10:04 pm
by TDA
Thanks Will, I appreciate it.

Yeah, that's the one.

Re: PreciseBits Collets

Posted: Mon Sep 28, 2015 10:13 pm
by WillAdams
We do list European equivalents for the Dewalt DWP611 on the wiki, so if you can find the equiv. for your country, you should be able to get the Precise Bits collet set for that.

http://www.shapeoko.com/wiki/index.php/Spindle_Options