g540 wiring diagrams

Get help with the Geckodrive motor controller
Post Reply
lioramsalem
Posts: 88
Joined: Mon Jun 09, 2014 1:43 pm

g540 wiring diagrams

Post by lioramsalem » Fri Feb 13, 2015 5:14 pm

Hi,
Some g540 wiring diagrams I found online:
1. The one from Gecko's site:
http://www.geckodrive.com/images/cms_fi ... Manual.pdf

2. Homann designs diagram:
http://www.homanndesigns.com/pdfs/EN010_V8.pdf

3. For Super-PID wiring:
http://www.vhipe.com/product-private/Su ... ctions.png

I'll update if I'll find other interesting diagrams..

LA
ShapeOko 2 #5840 w/ NEMA23, ACME Z axe belt upgrade, limit switches, spindle speed control, 400w brushless spindle, 9mm belts, aluminum bed, eShapeoko X carriage and belts system

Build log: http://www.shapeoko.com/forum/viewtopic.php?f=5&t=3650

orangezero
Posts: 76
Joined: Sun May 12, 2013 8:35 pm

Re: g540 wiring diagrams

Post by orangezero » Wed Feb 18, 2015 7:08 pm

Just a word of caution. The g540 is popular enough you can just search online for wiring diagrams and schematic drawings. However, be sure to read them in context because sometimes the drawings are wrong. There are a few from cnczone that show wires in the wrong places, which are then corrected by other posters in the forum. If you just go by the drawings you'll get it wrong.

Post Reply