3D model of Shapeoko 3

[edwardrford]

Sorry this has taken so long - I'll get these all bundled up soon.

Until then, here's the spindle mount plate and the Y carriage and the extrusion profile.

[AnonymousPerson]

You're really sticking with an -NC license?

[edwardrford]

Here are the rest of the files, in PDF format, available as a zip packaged.

https://www.dropbox.com/s/271fcka1wmynt ... 1.zip?dl=1

-Edward

[jayftee]

Part S3000 - Extrusion as per the exact drawing specifications:

Quick render

S3000 Render.png (89.29 KiB) Viewed 3174 times

Fusion 360 Shared link: http://a360.co/1Kt3U8g

Jeff

[jayftee]

Part S3001 - Y Axis Mount Plate as per the exact drawing specifications:

Quick Render

S3001 - Y Axis Mount Plate v6.png (97.75 KiB) Viewed 3162 times

Fusion 360 Shared link: http://a360.co/1Kt3O0w

Jeff

[AnonymousPerson]

Jay, what license are you releasing those models under? Something that allows commercial usage?

I'm kinda thinking CC-SA might be optimal for encouraging people to contribute back any changes... but open hardware licensing isn't a topic I understand in huge depth yet. Might need to bump it up the priority list of things to investigate.

[jayftee]

Those are free as in free beer.

I simply wish there would be a github for the shapeoko 3, with a master branch being the official stuff from Carbide 3D and branches made by contibutors.

However, my 3D models cannot overwride the copyright of Carbide 3D's work. I simply made 3D models based on their released documentation and thus, my work should follow the same model.

In other words, they released 2D pdf files of their components, I just translated them in 3D.

Jeff

[AnonymousPerson]

No worries. Looks like I'll need to make my own models then, as I need them.

[jayftee]

No worries. Looks like I'll need to make my own models then, as I need them.

Under the CC BY-NC which is the copyright used in Carbide's PFS, it means:

You are free to:

• Share — copy and redistribute the material in any medium or format
  
  Adapt — remix, transform, and build upon the material
  
  The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

• Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable
  manner, but not in any way that suggests the licensor endorses you or your use.
  
  NonCommercial — You may not use the material for commercial purposes.
  
  No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

The model posted here can be used by anyone, you can modify them, post and share them (as long as you include the original licence) but you cannot make money from them.

So, in the end, you may use the 3D models any which way you like by applying the rules above.

Jeff

[jayftee]

Part S3003 - X Axis Mount Plate as per the exact drawing specifications:

Quick Render

S3003 - X Axis Mount Plate v4.png (91.31 KiB) Viewed 3086 times

Fusion 360 Shared link: http://a360.co/1V3i7Pi

Jeff