3D model of Shapeoko 3

[heathenx]

That looks really great !!!
What I have to do, to get this model ?

Do you really want the model as I have it now? It's unfinished. I don't have much of any hardware. The v-wheels are incorrect too.

3D Files (STEP, IGES, Parasolid)
https://www.dropbox.com/s/olvxxuuyz98yx ... 1.zip?dl=0

[AnonymousPerson]

Let me know if I missed anything or messed up any of the footnote links. Looking forward to seeing the balance of the machine!

Didn't include my Z-axis plate model? (Creative Commons BY-SA licensed)

[GrblGru]

Thank you very much. Danke !!!
As you can see, I've opened this thread in april. Long time for waiting. I would like to add the model in my simulation program GrblGru. So I need a simple model w/o details. Now I can start to import the model.
Would be very fine, if you can finish your great work and share this to the forum. I think there are a lot of people waiting for a 3D model.

[heathenx]

Making slow progress on this thing. I have a lot more of the fasteners installed. There are a few things that I cannot find though. Also, doing my best on the electronic shroud. I'm actually taking measurements from the PDF in Inkscape. I've gotten things very close but it won't be perfect. It's hard for me to measure things on my own SO3 because I have a dust shield wrapped around it.

[heathenx]

Version 0.2 is up. Still not perfect but a little further along if someone needs it for reference.

By the way...zip file is still uploading to dropbox. Might need a few more minutes before the link is good.
https://dl.dropboxusercontent.com/u/172 ... y_v0.2.zip

[GrblGru]

Thanks again for sharing