Official SO3 Hello World

Assembly questions and answers for the Shapeoko 3 CNC Mill
WillAdams
Posts: 8547
Joined: Mon Apr 09, 2012 6:11 pm
Location: Pennsylvania --- south of the Turnpike, East of US-15
Contact:

Official SO3 Hello World

Post by WillAdams » Thu Jun 18, 2015 5:17 am

This is on the Carbide3D knowledge base site:

http://docs.carbide3d.com/article/37-sh ... ello-world

Looking forward to seeing them posted here and to the wiki.
Shapeoko 3XL #0006 w/ Carbide Compact Router w/0.125″ and ¼″ Carbide 3D precision collets
Nomad 883 Pro #596 (bamboo)

Brian Stone
Posts: 295
Joined: Tue Oct 21, 2014 1:52 am
Location: Seattle, WA

Re: Official SO3 Hello World

Post by Brian Stone » Thu Jun 18, 2015 6:55 am

Minor spelling error...
6.) Job pen down until it's *almost* touching the paper.
Shapeoko 2 #7353
1500x1000mm Shapeoko/X-Carve Hybrid, Nema-23's, Belt-Driven Z-Axis /w ACME Screw, Dewalt 611, Soundproof Enclosure
[Fusion 360 | Illustrator] -> Universal G-Code Sender

Hans
Posts: 290
Joined: Tue Dec 25, 2012 5:19 am
Location: Connecticut, USA

Re: Official SO3 Hello World

Post by Hans » Thu Jun 18, 2015 12:41 pm

Racing league, racing league, racing league!

I like the variety of different text sizes, that should make it easier to see any problems. Order of operations is probably efficient, but I'd prefer it didn't do SHAPEOKO in parts as if the machine was easily distracted.
Shapeoko #1,123

twforeman
Posts: 1350
Joined: Tue Jan 29, 2013 4:51 pm
Location: Minneapolis, MN
Contact:

Re: Official SO3 Hello World

Post by twforeman » Thu Jun 18, 2015 2:15 pm

Excellent. I'll have to see how fast I can run this. :)
Ender 3 3D Printer
ShapeOko v3 serial #0004 - upgrade thread
All of my ShapeOko related blog posts

Defy
Posts: 209
Joined: Sat Jan 03, 2015 5:53 pm
Location: Omaha
Contact:

Re: Official SO3 Hello World

Post by Defy » Fri Jun 19, 2015 12:40 am

Just makes me want a carbide 3d sticker for my shapeoko...

edwardrford
Posts: 1250
Joined: Mon Apr 09, 2012 5:40 pm
Location: Dixon, IL
Contact:

Re: Official SO3 Hello World

Post by edwardrford » Fri Jun 19, 2015 2:18 am

Defy wrote:Just makes me want a carbide 3d sticker for my shapeoko...
Me too!

We had a stack of those badges that we use for all of our Nomad machines. Ends up, they look great on the S3 spindle mount too!

We've ordered a bunch more, once they're delivered, we'll make them available.

-Edward
Shapeoko 1 #0 - a couple of upgrades.
Shapeoko 2 #0 - a couple of upgrades.
Shapeoko 3 #2 - Stock

twforeman
Posts: 1350
Joined: Tue Jan 29, 2013 4:51 pm
Location: Minneapolis, MN
Contact:

Re: Official SO3 Hello World

Post by twforeman » Fri Jun 19, 2015 2:35 am

Well that was fun. I cranked up the settings on my machine and ran this Hello World at 35,000 mm/min. I set the acceleration rate to 500 also. The machine did it but it wasn't super happy about it. :)

I shot some video, but it's out of focus, so I'll have to do it again.
Ender 3 3D Printer
ShapeOko v3 serial #0004 - upgrade thread
All of my ShapeOko related blog posts

woodworkerbob
Posts: 244
Joined: Tue Apr 15, 2014 6:31 pm
Location: SVE - Mesa, AZ

Re: Official SO3 Hello World

Post by woodworkerbob » Fri Jun 19, 2015 3:21 am

WillAdams wrote:This is on the Carbide3D knowledge base site:

http://docs.carbide3d.com/article/37-sh ... ello-world

Looking forward to seeing them posted here and to the wiki.
For those of us Luddites that run jobs in inches, DON'T RUN THIS GCODE after any of those jobs. I think without the G21 command the controller stays in "inches" mode. Maybe a smarter person knows that the controller reverts to millimeters, but I haven't tested this.


Bob
Shapeoko 3 - #13, dust deputy, precision collets, limit switches.
SVEMakerSpaces

CastIrony
Posts: 650
Joined: Mon Jul 21, 2014 10:21 pm
Location: Portland, OR

Re: Official SO3 Hello World

Post by CastIrony » Fri Jun 19, 2015 5:58 am

twforeman wrote:Well that was fun. I cranked up the settings on my machine and ran this Hello World at 35,000 mm/min. I set the acceleration rate to 500 also. The machine did it but it wasn't super happy about it. :)

I shot some video, but it's out of focus, so I'll have to do it again.
Yeah, but where will you get more paper? :lol:
Shapeoko 3 #192 - Complete! Needs limit switches.

Jem-tech
Posts: 22
Joined: Thu Feb 12, 2015 6:46 pm
Location: Kensington, Connecticut

Re: Official SO3 Hello World

Post by Jem-tech » Mon Jun 29, 2015 10:31 am

Just got my new board in and did a few hello worlds. :D
Attachments
shapeoko 3 2.jpg
shapeoko 3 2.jpg (289.76 KiB) Viewed 1522 times
shapeoko 3 1.jpg
shapeoko 3 1.jpg (303.02 KiB) Viewed 1522 times
Maker
Mendel90 3d printer
SO3 Batch 1 #?.
Transmission Linemen

Post Reply