Extrusion dimension question

Assembly questions and answers for the Shapeoko 3 CNC Mill
Post Reply
arkayic
Posts: 2
Joined: Mon Aug 17, 2015 7:46 pm

Extrusion dimension question

Post by arkayic » Tue Aug 18, 2015 12:29 am

I've ordered the Shapeoko 3 recently ( :D ) and intend on fabricating a few parts [to further improve on rigidity] before it arrives. I am specifically interested in the 55x85mm extrusion end screw positions and how far the extrusion sits above both the waste board and the table top. May I ask someone who either has access to a CAD or a Shapeoko 3 to give approx. dimension of d1/2 and exact dimensions of d3/4, please?

Thank You!
Arkayic
Attachments
S3 corner.JPG
S3 corner.JPG (35 KiB) Viewed 1099 times

HarryT
Posts: 9
Joined: Thu Apr 30, 2015 9:27 pm
Location: Germany

Re: Extrusion dimension question

Post by HarryT » Thu Aug 20, 2015 8:05 am

Hello arkayic,

The dimensions are:
D1 ~20 mm
D2 ~38 mm
D3 = 65 mm
D4 = 40 mm
Shapeoko 3 # 610
under construction

arkayic
Posts: 2
Joined: Mon Aug 17, 2015 7:46 pm

Re: Extrusion dimension question

Post by arkayic » Thu Aug 20, 2015 12:32 pm

Thank you very much!

Post Reply