Homing switch wiring for xxl confusion

Assembly questions and answers for the Shapeoko 3 CNC Mill
Mont
Posts: 2
Joined: Wed Feb 08, 2017 2:25 pm

Re: Homing switch wiring for xxl confusion

Post by Mont » Sun Feb 12, 2017 2:45 am

Things I found in assembling mine, in no particular order were

The Y axis plugs are reversible. In order, on the board, they are the second and third plugs. If your machine jogs backwards, reverse them.

The homing process needs to be added to both the controller and software.

The table dimensions need to be changed for the XXL version.

Mark your cables with the sharpie. Mark the connectors too. There's more room to write on them.

If your machine runs really slow after changing things, power it down, turn off your computer and start completely over.

WillAdams
Posts: 8618
Joined: Mon Apr 09, 2012 6:11 pm
Location: Pennsylvania --- south of the Turnpike, East of US-15
Contact:

Re: Homing switch wiring for xxl confusion

Post by WillAdams » Sun Feb 12, 2017 1:54 pm

Great tips!

To expand upon that last --- it's more likely that you were trying to run the machine with the Log window open --- closing it should get the machine running at full speed again.
Shapeoko 3XL #0006 w/ Carbide Compact Router w/0.125″ and ¼″ Carbide 3D precision collets

Post Reply