LinuxCNC on Raspberry PI

Discussions on various computer platforms and operating systems used to run Shapeoko mills.
Post Reply
bobt
Posts: 132
Joined: Tue Apr 17, 2012 7:08 pm

LinuxCNC on Raspberry PI

Post by bobt » Wed Feb 27, 2013 6:12 pm

Here is an article on how it is done.

Raspberry PI Forum item:
http://www.raspberrypi.org/phpBB3/viewt ... 37&t=33809

Referenced Article:
http://wiki.linuxcnc.org/cgi-bin/wiki.p ... nomaiBuild

Youtube video:
http://www.youtube.com/watch?v=WLIo7TA8 ... e=youtu.be

Bob Teeter
"What Box???" ShapeOko #397

xpix
Posts: 218
Joined: Thu Sep 06, 2012 6:47 am

Re: LinuxCNC on Raspberry PI

Post by xpix » Thu Feb 28, 2013 8:50 am

Awesome! A dream come true, LinuxCNC on RP ... unbelivable ;) Maybe i will install this next winter, cuz they have some problems and bugs now ... but ... cool :)

Kinsa
Posts: 1
Joined: Mon Apr 01, 2013 6:04 am

Re: LinuxCNC on Raspberry PI

Post by Kinsa » Mon Apr 01, 2013 6:28 am

Hi,

Just an update, a breadboard version of PICnc is available.

If you don't have a pickit programmer, RPi can program PIC32 using the GPIO pins.

Cheers!
42

xpix
Posts: 218
Joined: Thu Sep 06, 2012 6:47 am

Re: LinuxCNC on Raspberry PI

Post by xpix » Tue Apr 02, 2013 11:51 am

Kinsa wrote:Hi,
Just an update, a breadboard version of PICnc is available.
https://code.google.com/p/picnc/

Post Reply