Best case/recommended electronics?

Post Reply
lasershark1
Posts: 143
Joined: Sun Apr 22, 2012 1:52 am

Best case/recommended electronics?

Post by lasershark1 » Sun Apr 22, 2012 3:55 pm

I've read over the wiki, and it seems theres a lot of options for the electronics. Is there a recommended/best case set? The Uno seems to be king - but I've seen a few shields, some motors, etc... am I pretty much ok going with anything listed here, or is there a particular setup that's easiest to work with and most robust?

AtomSoft
Posts: 589
Joined: Mon Apr 09, 2012 9:15 pm
Location: Brooklyn NY
Contact:

Re: Best case/recommended electronics?

Post by AtomSoft » Sun Apr 22, 2012 4:06 pm

Im not sure if im being bias but i would go with my shield :)

http://atomsofttech.com/mainpress/?p=2212

Mainly because:

1) replaceable controllers - If you happen to burn one out.
2) small fan mount
3) Easy to connect/read silk screen. No manual needed for wiring
Blog / Store
Live to Love, Not to Hate.
You're not a failure because you don't make it, you're a success because you tried.
Do you like the help i give? Think i deserve a tip? DONATE

lasershark1
Posts: 143
Joined: Sun Apr 22, 2012 1:52 am

Re: Best case/recommended electronics?

Post by lasershark1 » Sun Apr 22, 2012 4:17 pm

Well that link mostly looks like "hey look what I did" and not any ordering information, price, if I need to assemble it myself, etc... :)

AtomSoft
Posts: 589
Joined: Mon Apr 09, 2012 9:15 pm
Location: Brooklyn NY
Contact:

Re: Best case/recommended electronics?

Post by AtomSoft » Sun Apr 22, 2012 4:20 pm

havent had much time to add it to the store. Also :

http://www.shapeoko.com/forum/viewtopic.php?f=4&t=109
Blog / Store
Live to Love, Not to Hate.
You're not a failure because you don't make it, you're a success because you tried.
Do you like the help i give? Think i deserve a tip? DONATE

lasershark1
Posts: 143
Joined: Sun Apr 22, 2012 1:52 am

Re: Best case/recommended electronics?

Post by lasershark1 » Sun Apr 22, 2012 4:27 pm

Oh I'm not complaining, just trying to find the easiest/best case option to get started with.

edwardrford
Posts: 1250
Joined: Mon Apr 09, 2012 5:40 pm
Location: Dixon, IL
Contact:

Re: Best case/recommended electronics?

Post by edwardrford » Sun Apr 22, 2012 4:33 pm

The two options that we generally point people to are:

1.) grblShield
2.) Buildlog stepper shield.

However, the stepper shield is sold out at the moment, so grblShield is your best bet if you're looking for a shield.

If you're going to run the Shapeoko from a full PC setup with parallel port (like you do your laser?). then you could always go with the 4 axis stepper controller from buildlog.net.

-Edward
Shapeoko 1 #0 - a couple of upgrades.
Shapeoko 2 #0 - a couple of upgrades.
Shapeoko 3 #2 - Stock

lasershark1
Posts: 143
Joined: Sun Apr 22, 2012 1:52 am

Re: Best case/recommended electronics?

Post by lasershark1 » Sun Apr 22, 2012 4:45 pm

Nah, laser is a Full Spectrum with their RetinaEngrave USB card. God I love that thing. ;)

I'll check out the grbl shield. Which brings me to my next set of questions to be posted in the right thread...

Post Reply