BEWARE - Reactive Substance Web site - *ISSUE RESOLVED*

landerramos
Posts: 3
Joined: Tue Jan 14, 2014 10:54 am

Re: BEWARE - Reactive Substance Web site - *ISSUE RESOLVED*

Post by landerramos » Sun Jan 19, 2014 1:15 pm

Hi again,

Can EJ send me a PM? Please

I need to contat EJ, but he is not responding to my emails.

Lander

ejs
Posts: 84
Joined: Sat Apr 28, 2012 7:42 pm
Location: Pittsburgh, PA, USA
Contact:

Re: BEWARE - Reactive Substance Web site - *ISSUE RESOLVED*

Post by ejs » Sun Jan 19, 2014 11:27 pm

Hi Lander,

I'm in need of your phone number since US postal will not ship overseas without it.

I had requested it. I am sorry if the request did not make it to you. I will duplicate this message in PM.

NOTE TO ALL INTERNATIONAL BUYERS--
Please add your phone number to PayPal notes or send it after an order to my PayPal address. This is the primary reason things are delayed internationally.

Thanks!
~EJ
Build it better than it was built for you. And give permission for the next guy to do the same. That's how Open Source works.
ShapeOko # 497: http://bit.ly/reactshop producing the Buildlog CNC Stepper Shield

landerramos
Posts: 3
Joined: Tue Jan 14, 2014 10:54 am

Re: BEWARE - Reactive Substance Web site - *ISSUE RESOLVED*

Post by landerramos » Mon Jan 20, 2014 12:18 pm

Hi EJ!

I cannot currently write PM on the forum, so I wrote you again to your paypal email address (I only have that) from two different email accounts. One of them is the same as my paypal address and forum email.

Hope you read them.

Thanks for your response this time.

Lander

sqbadyvr
Posts: 13
Joined: Sun Jan 19, 2014 4:46 am

Re: BEWARE - Reactive Substance Web site - *ISSUE RESOLVED*

Post by sqbadyvr » Mon Jan 20, 2014 7:25 pm

EJ:

Could you please give me your contact information--I cannot find your email on website and wanted to check on status of my order. (I placed it 1/9/2014)

Thanks much,
-DP

chomdh
Posts: 179
Joined: Sun Jan 19, 2014 3:43 pm
Location: Bettendorf, IA

Re: BEWARE - Reactive Substance Web site - *ISSUE RESOLVED*

Post by chomdh » Mon Jan 20, 2014 10:48 pm

Hi EJ,
If I purchase a driver board kit and 3 drivers, what's the estimated ship date? I'm in Missouri, USA.

Edit: ordered a carrier board kit and 3 pack of motor drivers today. Can't wait to test it out!
Shapeoko2 #3702:
DW611, arduino uno, gshield v5, NEMA23's on X & dual Y, NEMA17 on Z with ACME rod, 9mm belts, Mean Well NES-350-24V power supply, re-inforced gantry rails.
Soon to have inventables spindle mount and 1M X axis.

chomdh
Posts: 179
Joined: Sun Jan 19, 2014 3:43 pm
Location: Bettendorf, IA

Re: BEWARE - Reactive Substance Web site - *ISSUE RESOLVED*

Post by chomdh » Thu Jan 30, 2014 11:42 am

Does anyone know how to contact this seller besides PM? I have received no response from him at all after placing my order. No order confirmation, no ship date, no tracking number.

Edit: found his email via paypal, duh.
Shapeoko2 #3702:
DW611, arduino uno, gshield v5, NEMA23's on X & dual Y, NEMA17 on Z with ACME rod, 9mm belts, Mean Well NES-350-24V power supply, re-inforced gantry rails.
Soon to have inventables spindle mount and 1M X axis.

janapriya
Posts: 91
Joined: Tue Jan 28, 2014 2:50 am

Re: BEWARE - Reactive Substance Web site - *ISSUE RESOLVED*

Post by janapriya » Fri Jan 31, 2014 7:45 pm

Hi EJ,

I've placed the order 1/27 and couldn't reach you through your paypal email address. I've made a request through that email, hope you could get back to me. Also given I'm new to this forum, I couldn't contact via PM.

Thanks,

J.

Update1: EJ responded Feb 1st and promptly resolved my request (A change in the order). I contacted him originally 1/27 and 1/31. I'm waiting for the shipment.
Update2: Got the package today Feb 6th. Thank you EJS!!
Last edited by janapriya on Fri Feb 07, 2014 4:17 am, edited 4 times in total.

chomdh
Posts: 179
Joined: Sun Jan 19, 2014 3:43 pm
Location: Bettendorf, IA

Re: BEWARE - Reactive Substance Web site - *ISSUE RESOLVED*

Post by chomdh » Sat Feb 01, 2014 1:53 pm

10 days 2 PMs 2 emails and still no response. Maybe the parts will just show up at my door. Trying not to be too impatient. EJ it would be courteous to inform your buyers of order status and if there are delays for any reason.
Shapeoko2 #3702:
DW611, arduino uno, gshield v5, NEMA23's on X & dual Y, NEMA17 on Z with ACME rod, 9mm belts, Mean Well NES-350-24V power supply, re-inforced gantry rails.
Soon to have inventables spindle mount and 1M X axis.

chomdh
Posts: 179
Joined: Sun Jan 19, 2014 3:43 pm
Location: Bettendorf, IA

Re: BEWARE - Reactive Substance Web site - *ISSUE RESOLVED*

Post by chomdh » Tue Feb 04, 2014 2:37 am

I received a shipping notification tonight. Thanks EJS.
Shapeoko2 #3702:
DW611, arduino uno, gshield v5, NEMA23's on X & dual Y, NEMA17 on Z with ACME rod, 9mm belts, Mean Well NES-350-24V power supply, re-inforced gantry rails.
Soon to have inventables spindle mount and 1M X axis.

Post Reply