Wiring diagram for ShapeOko 2

Post Reply
MartinBarfoed
Posts: 3
Joined: Mon Jan 26, 2015 7:14 pm

Wiring diagram for ShapeOko 2

Post by MartinBarfoed » Mon Jan 26, 2015 7:54 pm

Attached to this post please find a wiring diagram for the ShapeOko 2. I'm running grbl 0.9 so the probe is included. You will also find relay wiring, limit switch wiring and Arduino USB to PC on-board USB wiring.


Here is a video with some views of the actual control box I made: https://www.youtube.com/watch?v=16Z8bDdIIAY
Attachments
Wiring of ShapeOko.jpg
Wiring of ShapeOko.jpg (66.79 KiB) Viewed 5571 times
Last edited by MartinBarfoed on Thu Feb 12, 2015 1:46 pm, edited 2 times in total.

cvoinescu
Posts: 4442
Joined: Thu Jul 19, 2012 6:50 pm
Location: Camberley, UK
Contact:

Re: Wiring diagram for ShapeOko 2

Post by cvoinescu » Mon Jan 26, 2015 11:40 pm

As far as I know, the probe pin is A5, not A0.
Proud owner of ShapeOko #709, eShapeOko #0, and of store.amberspyglass.co.uk

RobCee
Posts: 587
Joined: Wed Jan 08, 2014 11:33 am
Location: Birmingham, UK

Re: Wiring diagram for ShapeOko 2

Post by RobCee » Tue Jan 27, 2015 10:04 am

I agree that the Probe connection is (usually) configured to A5
grbl_connections.png
Pin diagram for Grbl v0.9
grbl_connections.png (295.92 KiB) Viewed 5700 times
ShapeOko2 #3400 - Chinese 800W AC Spindle - Stiffened X-Axis - TR10 Z-Axis - Inverted Z Motor - Hall Effect Limits - Drag Chains & Custom Brackets

MartinBarfoed
Posts: 3
Joined: Mon Jan 26, 2015 7:14 pm

Re: Wiring diagram for ShapeOko 2

Post by MartinBarfoed » Thu Feb 12, 2015 12:27 pm

UUps you are right. I will update the diagram so show A5. This is of course also the one I use - and I works!

Post Reply