Issue with Shapeoko 2 Quiet Cut Spindle issue

Post Reply
mcm001
Posts: 1
Joined: Thu Oct 26, 2017 9:35 pm

Issue with Shapeoko 2 Quiet Cut Spindle issue

Post by mcm001 » Thu Oct 26, 2017 9:39 pm

So I have a Shapeoko 2 I'm working on. I am having a weird issue with my Spindle however - it willl only be all the way on, or all the way off. There is not any in between. I've soldered the potentiometer wires straight to the board, and the potentiometer and Spindle were working fine a week ago. Any ideas?

Post Reply