Tarocco: Open Source Closed Loop Motor Controller

Post Reply
johnelle
Posts: 25
Joined: Tue Apr 18, 2017 10:40 am

Tarocco: Open Source Closed Loop Motor Controller

Post by johnelle » Fri Jun 29, 2018 10:04 am

From the crowdfunding "product page:"
Open source closed loop motor controller for not-so-small machines
Desktop CNC machinery typically uses stepper motors, often because they result in lower system cost, since they don’t require a position feedback sensor. But there are some situations where having a position feedback sensor is desirable or necessary, and the power output of a stepper motor, specially at high speeds, becomes the bottleneck for those who want a better performing machine.

I wanted to build a desktop CNC mill that was as impressive as some big name industrial machines. I decided to use brushed motors, as good quality and performance, reasonably priced units are easy to find and come in a wide variety of mechanical and electrical configurations. Speeds in excess of 15 m/min or 600 inches per minute and pushing through metal are no problem for a brushed servomotor coupled to a ballscrew, and the position feedback lowers the risk of ruining a machine job.

But it was difficult to find a commercially available, low cost motor controller, as they often have features one does not really need, or they’re built to handle large motors. That’s why I decided to create what would become the Tarocco motor controller.
https://www.crowdsupply.com/citrus-cnc/tarocco

Interesting project. I donated $5 so I could track it.

AnonymousPerson
Posts: 758
Joined: Sun Apr 26, 2015 1:16 pm
Location: 3753 Cruithne

Re: Tarocco: Open Source Closed Loop Motor Controller

Post by AnonymousPerson » Thu Jul 05, 2018 8:36 pm

Looks like the project is completed and all of the boards were shipped sometime last year?

Oh.. the more permanent website for it (http://www.citruscnc.com) seems to be offline. That doesn't bode well. :(
Shapeoko 3 #516

Post Reply