Zerblatt's build

zerblatt007
Posts: 196
Joined: Tue Sep 11, 2012 7:48 am
Location: Bergen, Norway
Contact:

Re: Zerblatt's build

Post by zerblatt007 » Thu Apr 17, 2014 10:57 am

Auarhau wrote:Nice build! I think you'r enclosure cost as much or more then the machine though:p
I was lucky and a friend gave me almost all of the used profiles in exchange for some wine.. :) And the plexiglass is also re-used.
Auarhau wrote:Where did you buy the kress by the way? I'm considering it too, but so far only found it on elfa for >5000kr.. :shock:
I bought the Kress from Sorotec: http://www.sorotec.de/shop/product_info ... -230v.html

I really like both the Kress and the Sorotec shop. Very satisfied customer.. :D
Shapeoko #958: Dual-Y drive, Double-X, Belt on outside, 1m Y-Axis, Acme Z, Opened up and boxed in. Kress 1050 Spindle.

selektha
Posts: 42
Joined: Tue Jul 02, 2013 2:05 pm

Re: Zerblatt's build

Post by selektha » Thu Apr 17, 2014 1:10 pm


zerblatt007
Posts: 196
Joined: Tue Sep 11, 2012 7:48 am
Location: Bergen, Norway
Contact:

Re: Zerblatt's build

Post by zerblatt007 » Mon Feb 08, 2016 8:42 am

I finally bought myself a 3D printer (Ultimaker2) and printed out a better dust collector/vacuum attachment.
It does still not have built in light and camera, but collects dust very well.. :)

I was inspired by this model: https://www.youmagine.com/designs/dw660-2-5-dust-shoe but could not get the bolts for my Kress mount quite right, so I designed a new one in Rhino3D.

Image

Image
Shapeoko #958: Dual-Y drive, Double-X, Belt on outside, 1m Y-Axis, Acme Z, Opened up and boxed in. Kress 1050 Spindle.

Post Reply